Cisco-IOS-XR-ipv6-ospfv3-cfg API API Reference
API generated from Cisco-IOS-XR-ipv6-ospfv3-cfg@2018-05-14.yang
API Endpoint
http://{Controller-IP}:{Controller-Port}/restconf/config/network-topology:network-topology/topology/topology-netconf/node/inetri/yang-ext:mount/
URL '/' code: %2F
Schemes: http
Version: 1.0.0
Leaf Color Code:
Key  Mandatory  OptionalPaths
PROCESS - Update
Update operation of resource: process
processbody object
ID of process-name
Request Content-Types: application/json
Request Example
{ {
"prefix": "string", IPv6 prefix format
"tag": "integer", Tag for default route
range: "1..4294967295"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
}, {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Enable graceful restart {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Enable graceful restart
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"virtual-link-address": "string", Router ID of virtual link neighbor "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
}
}
]
},
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets { {
"priority": "integer", Specify router priority
range: "0..255"
"neighbor-address": "string", IPV6 address
"cost": "integer", Interface cost
range: "1..65535"
"zone": "string", Zone
"database-filter": "boolean", Database filter
"poll-interval": "integer" OSPFv3 dead-router polling interval (in\nseconds)
range: "0..65535"
units: "second"
}
]
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Minimum interval between graceful restarts\n(seconds)
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
},
"enable": [ null ], Enable graceful restart
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface
"cost": "integer", Interface cost
range: "1..65535" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets
"interface-name": "string", Interface
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "out": "boolean" Enable out
}
},
"demand-circuit": "boolean", Enable/disable demand circuit operation
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
},
"flood-reduction": "boolean", Enable/disable flood reduction "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
},
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface {
"prefix": "string", IPv6 prefix format
"cost": "integer", Interface cost
range: "1..16777214"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
},
"cost": "integer", Interface cost
range: "1..65535"
"address": "string", Area ID if in IP address format
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync "out": "boolean" Enable out
}
},
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"stub": "boolean", Specify area as a stub area. Allowed only in\nnon-backbone areas "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
}
},
"flood-reduction": "boolean", Enable/disable flood reduction
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"detection-multiplier": "integer", Detect multiplier
range: "2..50"
"interval": "integer" Minimum interval between graceful restarts\n(seconds)
range: "3..30000"
units: "millisecond"
},
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "metric": "integer", OSPFv3 default metric
range: "0..16777214"
"default-info-originate": "boolean", Originate Type 7 default into NSSA area
"no-summary": [ null ], Do not send summary LSA into NSSA
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"no-redistribution": "boolean" No redistribution into this NSSA area
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"type7-translate-always": "boolean", Translate Type 7 to Type 5, even if not\nelected NSSA translator
"demand-circuit": "boolean", Enable/disable demand circuit operation
"default-cost": "integer", Set the summary default-cost of a NSSA/stub\narea
range: "0..16777215" {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Enable graceful restart
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"source-address": "string", Local sham-link endpoint
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"destination-address": "string", Remote sham-link endpoint "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
}
}
]
},
"priority": "integer" Specify router priority
range: "0..255"
}
], {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Enable graceful restart {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Enable graceful restart
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"virtual-link-address": "string", Router ID of virtual link neighbor "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
}
}
]
},
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface { {
"priority": "integer", Specify router priority
range: "0..255"
"neighbor-address": "string", IPV6 address
"cost": "integer", Interface cost
range: "1..65535"
"zone": "string", Zone
"database-filter": "boolean", Database filter
"poll-interval": "integer" OSPFv3 dead-router polling interval (in\nseconds)
range: "0..65535"
units: "second"
}
]
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Minimum interval between graceful restarts\n(seconds)
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
},
"enable": [ null ], Enable graceful restart
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface
"cost": "integer", Interface cost
range: "1..65535" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets
"interface-name": "string", Interface
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "out": "boolean" Enable out
}
},
"demand-circuit": "boolean", Enable/disable demand circuit operation
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
},
"flood-reduction": "boolean", Enable/disable flood reduction "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
},
"area-id": "integer", Area ID if in integer format
range: "0..4294967295" {
"prefix": "string", IPv6 prefix format
"cost": "integer", Interface cost
range: "1..16777214"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
},
"cost": "integer", Interface cost
range: "1..65535"
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync "out": "boolean" Enable out
}
},
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"stub": "boolean", Specify area as a stub area. Allowed only in\nnon-backbone areas "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
}
},
"flood-reduction": "boolean", Enable/disable flood reduction
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"detection-multiplier": "integer", Detect multiplier
range: "2..50"
"interval": "integer" Minimum interval between graceful restarts\n(seconds)
range: "3..30000"
units: "millisecond"
}, "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "metric": "integer", OSPFv3 default metric
range: "0..16777214"
"default-info-originate": "boolean", Originate Type 7 default into NSSA area
"no-summary": [ null ], Do not send summary LSA into NSSA
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"no-redistribution": "boolean" No redistribution into this NSSA area
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"type7-translate-always": "boolean", Translate Type 7 to Type 5, even if not\nelected NSSA translator
"demand-circuit": "boolean", Enable/disable demand circuit operation
"default-cost": "integer", Set the summary default-cost of a NSSA/stub\narea
range: "0..16777215" {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Enable graceful restart
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"source-address": "string", Local sham-link endpoint
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"destination-address": "string", Remote sham-link endpoint "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
}
}
]
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
},
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"cost": "integer", Interface cost
range: "1..65535" "priority": "enumeration" Specify router priority
Options:
critical
high
medium
low
}, "load-sharing-disable": [ null ], Disable load sharing between multiple backups
"priority": "enumeration", Specify router priority
Options:
critical
high
medium
low {
"tiebreaker-type": "enumeration", Tiebreaker type
Options:
downstream
line-card-disjoint
lowest-metric
node-protect
primary-path
secondary-path
srlg-disjoint
"tiebreaker-index": "integer" Index value for a tiebreaker
range: "1..255"
}
]
}
}
},
"spf-prefix-priority-disable": [ null ], SPF prefix prioritization disabled
"passive": "boolean", Enable/disable routing updates on an interface
"default-metric": "integer", OSPFv3 default metric
range: "1..16777214"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint
"router-id": "string", Specify the router ID for this OSPFv3 process in\nIPv4 address format "max-window-traps": "integer", Max number of traps sent in window time
range: "0..300"
"window-size": "integer" Trap rate limit sliding window size
range: "2..60"
},
"context": "string" SNMP context configuration
}, "enable": [ null ], Enable graceful restart
"strict-lsa-checking": [ null ], Terminate graceful restart helper mode if LSA\nchanged
"interval": "integer", Minimum interval between graceful restarts\n(seconds)
range: "90..3600"
units: "second"
"helper": [ null ], Disable router's helper support
"lifetime": "integer" Maximum route lifetime following restart\n(seconds)
range: "90..1800"
units: "second"
},
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"instance": "integer", Instance ID
range: "0..255" { {
"eigrp-route-type": "enumeration", EIGRP route type
Options:
internal
external
"default-metric": "integer", OSPFv3 default metric
range: "0..16777214"
"bgp-preserve-default-info": "boolean", Preserve Metric and Metric Type ofBGP Default\nRoute
"as-yy": "integer", 4-byte AS number in asdot (X.Y) format -\nsecond half (Y), or 2-byte AS number, or\n4-byte AS number in asplain format
range: "0..4294967295"
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"internal-route-type": "enumeration", Redistribute OSPFv3 routes
Options:
internal
"as-xx": "integer", 4-byte AS number in asdot (X.Y) format -\nfirst half (X)
range: "0..65535"
"preserve-med": "boolean", Preserve (Multi-Exit Discriminator) of BGP\nroutes
"tag": "integer", Tag for default route
range: "0..4294967295"
"use-rib-metric": "boolean", Use metric from RIB for redistributed routes
"isis-route-type": "enumeration", ISIS route type
Options:
level1
level2
level1-and2
"redistribute-route": "boolean", Redistribution of OSPFv3 routes
"external-route-type": "enumeration", Redistribute OSPFv3 external routes
Options:
external1
external2
external
"nssa-external-route-type": "enumeration", Redistribute OSPFv3 NSSA external routes
Options:
external1
external2
external
"route-policy-name": "string" Route policy to default-information\norigination
}
], {
"eigrp-route-type": "enumeration", EIGRP route type
Options:
internal
external
"default-metric": "integer", OSPFv3 default metric
range: "0..16777214"
"bgp-preserve-default-info": "boolean", Preserve Metric and Metric Type ofBGP Default\nRoute
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"process-name": "string", OSPFv3 process name
"internal-route-type": "enumeration", Redistribute OSPFv3 routes
Options:
internal
"preserve-med": "boolean", Preserve (Multi-Exit Discriminator) of BGP\nroutes
"tag": "integer", Tag for default route
range: "0..4294967295"
"use-rib-metric": "boolean", Use metric from RIB for redistributed routes
"isis-route-type": "enumeration", ISIS route type
Options:
level1
level2
level1-and2
"redistribute-route": "boolean", Redistribution of OSPFv3 routes
"external-route-type": "enumeration", Redistribute OSPFv3 external routes
Options:
external1
external2
external
"nssa-external-route-type": "enumeration", Redistribute OSPFv3 NSSA external routes
Options:
external1
external2
external
"route-policy-name": "string" Route policy to default-information\norigination
}
], {
"eigrp-route-type": "enumeration", EIGRP route type
Options:
internal
external
"default-metric": "integer", OSPFv3 default metric
range: "0..16777214"
"bgp-preserve-default-info": "boolean", Preserve Metric and Metric Type ofBGP Default\nRoute
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"internal-route-type": "enumeration", Redistribute OSPFv3 routes
Options:
internal
"as-xx": "integer", 4-byte AS number in asdot (X.Y) format -\nfirst half (X)
range: "0..65535"
"preserve-med": "boolean", Preserve (Multi-Exit Discriminator) of BGP\nroutes
"tag": "integer", Tag for default route
range: "0..4294967295"
"use-rib-metric": "boolean", Use metric from RIB for redistributed routes
"isis-route-type": "enumeration", ISIS route type
Options:
level1
level2
level1-and2
"redistribute-route": "boolean", Redistribution of OSPFv3 routes
"external-route-type": "enumeration", Redistribute OSPFv3 external routes
Options:
external1
external2
external
"nssa-external-route-type": "enumeration", Redistribute OSPFv3 NSSA external routes
Options:
external1
external2
external
"route-policy-name": "string" Route policy to default-information\norigination
}
],
"protocol-name": "enumeration", none
Options:
connected
static
bgp
isis
ospfv3
eigrp
subscriber
application
mobile "eigrp-route-type": "enumeration", EIGRP route type
Options:
internal
external
"default-metric": "integer", OSPFv3 default metric
range: "0..16777214"
"bgp-preserve-default-info": "boolean", Preserve Metric and Metric Type ofBGP Default\nRoute
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"internal-route-type": "enumeration", Redistribute OSPFv3 routes
Options:
internal
"preserve-med": "boolean", Preserve (Multi-Exit Discriminator) of BGP\nroutes
"tag": "integer", Tag for default route
range: "0..4294967295"
"use-rib-metric": "boolean", Use metric from RIB for redistributed routes
"isis-route-type": "enumeration", ISIS route type
Options:
level1
level2
level1-and2
"redistribute-route": "boolean", Redistribution of OSPFv3 routes
"external-route-type": "enumeration", Redistribute OSPFv3 external routes
Options:
external1
external2
external
"nssa-external-route-type": "enumeration", Redistribute OSPFv3 NSSA external routes
Options:
external1
external2
external
"route-policy-name": "string" Route policy to default-information\norigination
}
}
]
}, "vrf-lite": "boolean", Enable VRF Lite
"type7-translate-zero-forwarding-addr": "boolean", Enable capability to translate LSAs with fwd\naddr
"type7-prefer": "boolean" NSSA capability to prefer Type 7 over Type 5
},
"demand-circuit": "boolean", Enable/disable demand circuit operation
"spf-prefix-priority-policy": "string", Route policy for SPF prefix prioritization
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets "reference-bandwidth": "integer", Specify reference bandwidth for cost\ncomputations in terms of Mbits per second
range: "1..4294967"
units: "Mbit/s"
"disable": [ null ] Specify 'true' to assign cost based on\ninterface type
}, {
"all-or-connected-or-static-prefix-list": "string", Prefix-list name {
"prefix-list": "string", Filter prefixes based on an IPv6 prefix-list
"process-name": "string" OSPFv3 process name
}
],
"protocol-name": "enumeration", none
Options:
all
connected
static
bgp
isis
ospfv3
eigrp {
"as-xx": "integer", 4-byte AS number in asdot (X.Y) format -\nfirst half (X)
range: "1..65535"
"prefix-list": "string", Filter prefixes based on an IPv6 prefix-list
"as-yy": "integer" 4-byte AS number in asdot (X.Y) format -\nsecond half (Y), or 2-byte AS number, or\n4-byte AS number in asplain format
range: "0..4294967295"
}
], {
"as-xx": "integer", 4-byte AS number in asdot (X.Y) format -\nfirst half (X)
range: "1..65535"
"prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
]
}
]
}
},
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
}, "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000" "always": "boolean", Unconditionally enter stub router operational\nstate
"metric": "integer", OSPFv3 default metric
range: "0..16777214"
"tag": "integer", Tag for default route
range: "0..4294967295"
"metric-type": "integer", OSPFv3 metric type for default routes
"route-policy-name": "string" Route policy to default-information\norigination
}
}, "out": [ null ] Enable out
}
}, "administrative": "integer", Define an administrative distance
range: "1..255" "intra-area": "integer", Distance for intra-area routes
range: "1..255"
"external": "integer", Distance for external type 5 and type 7 routes
range: "1..255"
"inter-area": "integer" Distance for inter-area routes
range: "1..255"
}
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Minimum interval between graceful restarts\n(seconds)
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
}, "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "prefixes": "integer", Maximum number of prefixes redistributed to\nprotocol
range: "1..4294967295"
"threshold": "integer", Threshold value (%) at which to generate a\nwarning message
range: "1..100"
"warning-only": [ null ] Only give warning message when limit is\nexceeded
},
"interfaces": "integer", Specify maximum number of interfaces
range: "1..4294967295"
"paths": "integer" Specify maximum number of paths per route
range: "1..64"
}, "mospf": [ null ] Enable ignore of MOSPF type 6 LSA
}
}, "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
}
}, "arrival": "integer" The minimum interval in milliseconds between\naccepting the same LSA
range: "0..60000"
units: "millisecond"
}, "maximum-delay": "integer", Maximum delay between originating the same\nLSA in milliseconds
range: "1..600000"
"minimum-delay": "integer", Minimum delay between originating the same\nLSA in milliseconds
range: "1..600000"
"first-delay": "integer" Delay to generate first occurrence of LSA in\nmilliseconds
range: "1..600000"
}, "maximum-delay": "integer", Maximum delay between originating the same\nLSA in milliseconds
range: "1..600000"
units: "millisecond"
"minimum-delay": "integer", Minimum delay between originating the same\nLSA in milliseconds
range: "1..600000"
units: "millisecond"
"first-delay": "integer" Delay to generate first occurrence of LSA in\nmilliseconds
range: "0..600000"
units: "millisecond"
}
}, "flood": "integer", The minimum interval in milliseconds to pace\nlimit flooding on interface
range: "5..100"
units: "millisecond"
"retransmission": "integer", The minimum interval in msec between neighbor\nretransmissions
range: "5..100"
"lsa-group": "integer" Interval in seconds at which LSAs are grouped\nand refreshed, checksummed, or aged
range: "10..1800"
units: "second"
}
},
"log-adjacency-changes": "enumeration", Log changes in adjacency state
Options:
suppress
brief
detail "always": [ null ], Unconditionally enter stub router operational\nstate
"on-switchover": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second" "wait-for-bgp": "boolean", Wait until BGP converges (only applicable to\ndefault VRF)
"wait-time": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
},
"on-proc-migration": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
"on-proc-restart": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
}, "on-proc-restart": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second" "wait-for-bgp": "boolean", Wait until BGP converges (only applicable to\ndefault VRF)
"wait-time": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
},
"on-proc-migration": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
"always": [ null ], Unconditionally enter stub router operational\nstate
"include-stub": [ null ], Advertise stub links with maximum metric in stub\nrouter mode
"external-lsa": "integer", Advertise external LSAs with modified metric\nin stub router mode
range: "1..16777214"
default: "16711680"
"summary-lsa": "integer", Advertise summary LSAs with modified metric in\nstub router mode
range: "1..16777214"
default: "16711680"
"on-switchover": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
}, "on-proc-restart": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second" "wait-for-bgp": "boolean", Wait until BGP converges (only applicable to\ndefault VRF)
"wait-time": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
},
"on-proc-migration": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
"always": [ null ], Unconditionally enter stub router operational\nstate
"include-stub": [ null ], Advertise stub links with maximum metric in stub\nrouter mode
"on-switchover": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
}
},
"flood-reduction": "boolean", Enable/disable flood reduction
"priority": "integer" Specify router priority
range: "0..255"
}, { {
"prefix": "string", IPv6 prefix format
"tag": "integer", Tag for default route
range: "1..4294967295"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
}, {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Enable graceful restart {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Enable graceful restart
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"virtual-link-address": "string", Router ID of virtual link neighbor "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
}
}
]
},
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets { {
"priority": "integer", Specify router priority
range: "0..255"
"neighbor-address": "string", IPV6 address
"cost": "integer", Interface cost
range: "1..65535"
"zone": "string", Zone
"database-filter": "boolean", Database filter
"poll-interval": "integer" OSPFv3 dead-router polling interval (in\nseconds)
range: "0..65535"
units: "second"
}
]
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Minimum interval between graceful restarts\n(seconds)
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
},
"enable": [ null ], Enable graceful restart
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface
"cost": "integer", Interface cost
range: "1..65535" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets
"interface-name": "string", Interface
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "out": "boolean" Enable out
}
},
"demand-circuit": "boolean", Enable/disable demand circuit operation
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
},
"flood-reduction": "boolean", Enable/disable flood reduction "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
},
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface {
"prefix": "string", IPv6 prefix format
"cost": "integer", Interface cost
range: "1..16777214"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
},
"cost": "integer", Interface cost
range: "1..65535"
"address": "string", Area ID if in IP address format
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync "out": "boolean" Enable out
}
},
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"stub": "boolean", Specify area as a stub area. Allowed only in\nnon-backbone areas "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
}
},
"flood-reduction": "boolean", Enable/disable flood reduction
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"detection-multiplier": "integer", Detect multiplier
range: "2..50"
"interval": "integer" Minimum interval between graceful restarts\n(seconds)
range: "3..30000"
units: "millisecond"
},
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "metric": "integer", OSPFv3 default metric
range: "0..16777214"
"default-info-originate": "boolean", Originate Type 7 default into NSSA area
"no-summary": [ null ], Do not send summary LSA into NSSA
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"no-redistribution": "boolean" No redistribution into this NSSA area
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"type7-translate-always": "boolean", Translate Type 7 to Type 5, even if not\nelected NSSA translator
"demand-circuit": "boolean", Enable/disable demand circuit operation
"default-cost": "integer", Set the summary default-cost of a NSSA/stub\narea
range: "0..16777215" {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Enable graceful restart
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"source-address": "string", Local sham-link endpoint
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"destination-address": "string", Remote sham-link endpoint "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
}
}
]
},
"priority": "integer" Specify router priority
range: "0..255"
}
], {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Enable graceful restart {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Enable graceful restart
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"virtual-link-address": "string", Router ID of virtual link neighbor "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
}
}
]
},
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface { {
"priority": "integer", Specify router priority
range: "0..255"
"neighbor-address": "string", IPV6 address
"cost": "integer", Interface cost
range: "1..65535"
"zone": "string", Zone
"database-filter": "boolean", Database filter
"poll-interval": "integer" OSPFv3 dead-router polling interval (in\nseconds)
range: "0..65535"
units: "second"
}
]
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Minimum interval between graceful restarts\n(seconds)
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
},
"enable": [ null ], Enable graceful restart
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface
"cost": "integer", Interface cost
range: "1..65535" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets
"interface-name": "string", Interface
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "out": "boolean" Enable out
}
},
"demand-circuit": "boolean", Enable/disable demand circuit operation
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
},
"flood-reduction": "boolean", Enable/disable flood reduction "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
},
"area-id": "integer", Area ID if in integer format
range: "0..4294967295" {
"prefix": "string", IPv6 prefix format
"cost": "integer", Interface cost
range: "1..16777214"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
},
"cost": "integer", Interface cost
range: "1..65535"
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync "out": "boolean" Enable out
}
},
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"stub": "boolean", Specify area as a stub area. Allowed only in\nnon-backbone areas "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
}
},
"flood-reduction": "boolean", Enable/disable flood reduction
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"detection-multiplier": "integer", Detect multiplier
range: "2..50"
"interval": "integer" Minimum interval between graceful restarts\n(seconds)
range: "3..30000"
units: "millisecond"
}, "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "metric": "integer", OSPFv3 default metric
range: "0..16777214"
"default-info-originate": "boolean", Originate Type 7 default into NSSA area
"no-summary": [ null ], Do not send summary LSA into NSSA
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"no-redistribution": "boolean" No redistribution into this NSSA area
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"type7-translate-always": "boolean", Translate Type 7 to Type 5, even if not\nelected NSSA translator
"demand-circuit": "boolean", Enable/disable demand circuit operation
"default-cost": "integer", Set the summary default-cost of a NSSA/stub\narea
range: "0..16777215" {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Enable graceful restart
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"source-address": "string", Local sham-link endpoint
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"destination-address": "string", Remote sham-link endpoint "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
}
}
]
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
},
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second" "administrative": "integer", Define an administrative distance
range: "1..255" "intra-area": "integer", Distance for intra-area routes
range: "1..255"
"external": "integer", Distance for external type 5 and type 7 routes
range: "1..255"
"inter-area": "integer" Distance for inter-area routes
range: "1..255"
}
},
"cost": "integer", Interface cost
range: "1..65535" "priority": "enumeration" Specify router priority
Options:
critical
high
medium
low
}, "load-sharing-disable": [ null ], Disable load sharing between multiple backups
"priority": "enumeration", Specify router priority
Options:
critical
high
medium
low {
"tiebreaker-type": "enumeration", Tiebreaker type
Options:
downstream
line-card-disjoint
lowest-metric
node-protect
primary-path
secondary-path
srlg-disjoint
"tiebreaker-index": "integer" Index value for a tiebreaker
range: "1..255"
}
]
}
}
},
"priority": "integer", Specify router priority
range: "0..255"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"default-metric": "integer", OSPFv3 default metric
range: "1..16777214"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint
"router-id": "string", Specify the router ID for this OSPFv3 process in\nIPv4 address format "max-window-traps": "integer", Max number of traps sent in window time
range: "0..300"
"window-size": "integer" Trap rate limit sliding window size
range: "2..60"
},
"context": "string" SNMP context configuration
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255"
"vrf-name": "string", Name for this VRF "domain-id-name": "string", Secondary domain ID value
"domain-id-type": "enumeration" Secondary domain ID type
Options:
type0005
type0105
type0205
type8005
}, {
"domain-id-name": "string", Secondary domain ID value
"domain-id-type": "enumeration" Secondary domain ID type
Options:
type0005
type0105
type0205
type8005
}
]
}
}, { {
"eigrp-route-type": "enumeration", EIGRP route type
Options:
internal
external
"default-metric": "integer", OSPFv3 default metric
range: "0..16777214"
"bgp-preserve-default-info": "boolean", Preserve Metric and Metric Type ofBGP Default\nRoute
"as-yy": "integer", 4-byte AS number in asdot (X.Y) format -\nsecond half (Y), or 2-byte AS number, or\n4-byte AS number in asplain format
range: "0..4294967295"
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"internal-route-type": "enumeration", Redistribute OSPFv3 routes
Options:
internal
"as-xx": "integer", 4-byte AS number in asdot (X.Y) format -\nfirst half (X)
range: "0..65535"
"preserve-med": "boolean", Preserve (Multi-Exit Discriminator) of BGP\nroutes
"tag": "integer", Tag for default route
range: "0..4294967295"
"use-rib-metric": "boolean", Use metric from RIB for redistributed routes
"isis-route-type": "enumeration", ISIS route type
Options:
level1
level2
level1-and2
"redistribute-route": "boolean", Redistribution of OSPFv3 routes
"external-route-type": "enumeration", Redistribute OSPFv3 external routes
Options:
external1
external2
external
"nssa-external-route-type": "enumeration", Redistribute OSPFv3 NSSA external routes
Options:
external1
external2
external
"route-policy-name": "string" Route policy to default-information\norigination
}
], {
"eigrp-route-type": "enumeration", EIGRP route type
Options:
internal
external
"default-metric": "integer", OSPFv3 default metric
range: "0..16777214"
"bgp-preserve-default-info": "boolean", Preserve Metric and Metric Type ofBGP Default\nRoute
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"process-name": "string", OSPFv3 process name
"internal-route-type": "enumeration", Redistribute OSPFv3 routes
Options:
internal
"preserve-med": "boolean", Preserve (Multi-Exit Discriminator) of BGP\nroutes
"tag": "integer", Tag for default route
range: "0..4294967295"
"use-rib-metric": "boolean", Use metric from RIB for redistributed routes
"isis-route-type": "enumeration", ISIS route type
Options:
level1
level2
level1-and2
"redistribute-route": "boolean", Redistribution of OSPFv3 routes
"external-route-type": "enumeration", Redistribute OSPFv3 external routes
Options:
external1
external2
external
"nssa-external-route-type": "enumeration", Redistribute OSPFv3 NSSA external routes
Options:
external1
external2
external
"route-policy-name": "string" Route policy to default-information\norigination
}
], {
"eigrp-route-type": "enumeration", EIGRP route type
Options:
internal
external
"default-metric": "integer", OSPFv3 default metric
range: "0..16777214"
"bgp-preserve-default-info": "boolean", Preserve Metric and Metric Type ofBGP Default\nRoute
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"internal-route-type": "enumeration", Redistribute OSPFv3 routes
Options:
internal
"as-xx": "integer", 4-byte AS number in asdot (X.Y) format -\nfirst half (X)
range: "0..65535"
"preserve-med": "boolean", Preserve (Multi-Exit Discriminator) of BGP\nroutes
"tag": "integer", Tag for default route
range: "0..4294967295"
"use-rib-metric": "boolean", Use metric from RIB for redistributed routes
"isis-route-type": "enumeration", ISIS route type
Options:
level1
level2
level1-and2
"redistribute-route": "boolean", Redistribution of OSPFv3 routes
"external-route-type": "enumeration", Redistribute OSPFv3 external routes
Options:
external1
external2
external
"nssa-external-route-type": "enumeration", Redistribute OSPFv3 NSSA external routes
Options:
external1
external2
external
"route-policy-name": "string" Route policy to default-information\norigination
}
],
"protocol-name": "enumeration", none
Options:
connected
static
bgp
isis
ospfv3
eigrp
subscriber
application
mobile "eigrp-route-type": "enumeration", EIGRP route type
Options:
internal
external
"default-metric": "integer", OSPFv3 default metric
range: "0..16777214"
"bgp-preserve-default-info": "boolean", Preserve Metric and Metric Type ofBGP Default\nRoute
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"internal-route-type": "enumeration", Redistribute OSPFv3 routes
Options:
internal
"preserve-med": "boolean", Preserve (Multi-Exit Discriminator) of BGP\nroutes
"tag": "integer", Tag for default route
range: "0..4294967295"
"use-rib-metric": "boolean", Use metric from RIB for redistributed routes
"isis-route-type": "enumeration", ISIS route type
Options:
level1
level2
level1-and2
"redistribute-route": "boolean", Redistribution of OSPFv3 routes
"external-route-type": "enumeration", Redistribute OSPFv3 external routes
Options:
external1
external2
external
"nssa-external-route-type": "enumeration", Redistribute OSPFv3 NSSA external routes
Options:
external1
external2
external
"route-policy-name": "string" Route policy to default-information\norigination
}
}
]
}, "mospf": [ null ] Enable ignore of MOSPF type 6 LSA
}
},
"spf-prefix-priority-policy": "string", Route policy for SPF prefix prioritization
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second" "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface {
"all-or-connected-or-static-prefix-list": "string", Prefix-list name {
"prefix-list": "string", Filter prefixes based on an IPv6 prefix-list
"process-name": "string" OSPFv3 process name
}
],
"protocol-name": "enumeration", none
Options:
all
connected
static
bgp
isis
ospfv3
eigrp {
"as-xx": "integer", 4-byte AS number in asdot (X.Y) format -\nfirst half (X)
range: "1..65535"
"prefix-list": "string", Filter prefixes based on an IPv6 prefix-list
"as-yy": "integer" 4-byte AS number in asdot (X.Y) format -\nsecond half (Y), or 2-byte AS number, or\n4-byte AS number in asplain format
range: "0..4294967295"
}
], {
"as-xx": "integer", 4-byte AS number in asdot (X.Y) format -\nfirst half (X)
range: "1..65535"
"prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
]
}
]
}
}, "reference-bandwidth": "integer", Specify reference bandwidth for cost\ncomputations in terms of Mbits per second
range: "1..4294967"
units: "Mbit/s"
"disable": [ null ] Specify 'true' to assign cost based on\ninterface type
}, "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000" "always": "boolean", Unconditionally enter stub router operational\nstate
"metric": "integer", OSPFv3 default metric
range: "0..16777214"
"tag": "integer", Tag for default route
range: "0..4294967295"
"metric-type": "integer", OSPFv3 metric type for default routes
"route-policy-name": "string" Route policy to default-information\norigination
}
}, "out": [ null ] Enable out
}
},
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets
"demand-circuit": "boolean", Enable/disable demand circuit operation
"snmpvrf-trap": [ null ], Enable SNMP trap configuration in a VRF "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "prefixes": "integer", Maximum number of prefixes redistributed to\nprotocol
range: "1..4294967295"
"threshold": "integer", Threshold value (%) at which to generate a\nwarning message
range: "1..100"
"warning-only": [ null ] Only give warning message when limit is\nexceeded
},
"interfaces": "integer", Specify maximum number of interfaces
range: "1..4294967295"
"paths": "integer" Specify maximum number of paths per route
range: "1..64"
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Minimum interval between graceful restarts\n(seconds)
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
}, "vrf-lite": "boolean", Enable VRF Lite
"type7-translate-zero-forwarding-addr": "boolean", Enable capability to translate LSAs with fwd\naddr
"type7-prefer": "boolean" NSSA capability to prefer Type 7 over Type 5
}, "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
}
}, "arrival": "integer" The minimum interval in milliseconds between\naccepting the same LSA
range: "0..60000"
units: "millisecond"
}, "maximum-delay": "integer", Maximum delay between originating the same\nLSA in milliseconds
range: "1..600000"
"minimum-delay": "integer", Minimum delay between originating the same\nLSA in milliseconds
range: "1..600000"
"first-delay": "integer" Delay to generate first occurrence of LSA in\nmilliseconds
range: "1..600000"
}, "maximum-delay": "integer", Maximum delay between originating the same\nLSA in milliseconds
range: "1..600000"
units: "millisecond"
"minimum-delay": "integer", Minimum delay between originating the same\nLSA in milliseconds
range: "1..600000"
units: "millisecond"
"first-delay": "integer" Delay to generate first occurrence of LSA in\nmilliseconds
range: "0..600000"
units: "millisecond"
}
}, "flood": "integer", The minimum interval in milliseconds to pace\nlimit flooding on interface
range: "5..100"
units: "millisecond"
"retransmission": "integer", The minimum interval in msec between neighbor\nretransmissions
range: "5..100"
"lsa-group": "integer" Interval in seconds at which LSAs are grouped\nand refreshed, checksummed, or aged
range: "10..1800"
units: "second"
}
},
"log-adjacency-changes": "enumeration", Log changes in adjacency state
Options:
suppress
brief
detail "always": [ null ], Unconditionally enter stub router operational\nstate
"on-switchover": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second" "wait-for-bgp": "boolean", Wait until BGP converges (only applicable to\ndefault VRF)
"wait-time": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
},
"on-proc-migration": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
"on-proc-restart": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
}, "on-proc-restart": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second" "wait-for-bgp": "boolean", Wait until BGP converges (only applicable to\ndefault VRF)
"wait-time": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
},
"on-proc-migration": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
"always": [ null ], Unconditionally enter stub router operational\nstate
"include-stub": [ null ], Advertise stub links with maximum metric in stub\nrouter mode
"external-lsa": "integer", Advertise external LSAs with modified metric\nin stub router mode
range: "1..16777214"
default: "16711680"
"summary-lsa": "integer", Advertise summary LSAs with modified metric in\nstub router mode
range: "1..16777214"
default: "16711680"
"on-switchover": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
}, "on-proc-restart": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second" "wait-for-bgp": "boolean", Wait until BGP converges (only applicable to\ndefault VRF)
"wait-time": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
},
"on-proc-migration": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
"always": [ null ], Unconditionally enter stub router operational\nstate
"include-stub": [ null ], Advertise stub links with maximum metric in stub\nrouter mode
"on-switchover": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
}
},
"flood-reduction": "boolean", Enable/disable flood reduction "enable": [ null ], Enable graceful restart
"strict-lsa-checking": [ null ], Terminate graceful restart helper mode if LSA\nchanged
"interval": "integer", Minimum interval between graceful restarts\n(seconds)
range: "90..3600"
units: "second"
"helper": [ null ], Disable router's helper support
"lifetime": "integer" Maximum route lifetime following restart\n(seconds)
range: "90..1800"
units: "second"
}
}
]
}, "af-name": "enumeration", Address Family (AF) identifier
Options:
ipv6
"saf-name": "enumeration" Subsequent Address Family (SAF) identifier
Options:
unicast
}, {
"trace-buf-name": "string", Name for this trace buffer
"bufsize": "enumeration" Buffer size
Options:
size0
size256
size512
size1024
size2048
size4096
size8192
size16384
size32768
size65536
}
]
},
"protocol-shutdown": [ null ], Enable protocol shutdown
"process-name": "string", OSPFv3 process name
"nsr": "enumeration" Enable non-stop routing
Options:
true
false
}
}
Successful operation
Internal Error
Response Content-Types: application/json
PROCESS - Create
Create operation of resource: process
processbody object
ID of process-name
Request Content-Types: application/json
Request Example
{ {
"prefix": "string", IPv6 prefix format
"tag": "integer", Tag for default route
range: "1..4294967295"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
}, {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Enable graceful restart {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Enable graceful restart
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"virtual-link-address": "string", Router ID of virtual link neighbor "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
}
}
]
},
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets { {
"priority": "integer", Specify router priority
range: "0..255"
"neighbor-address": "string", IPV6 address
"cost": "integer", Interface cost
range: "1..65535"
"zone": "string", Zone
"database-filter": "boolean", Database filter
"poll-interval": "integer" OSPFv3 dead-router polling interval (in\nseconds)
range: "0..65535"
units: "second"
}
]
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Minimum interval between graceful restarts\n(seconds)
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
},
"enable": [ null ], Enable graceful restart
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface
"cost": "integer", Interface cost
range: "1..65535" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets
"interface-name": "string", Interface
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "out": "boolean" Enable out
}
},
"demand-circuit": "boolean", Enable/disable demand circuit operation
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
},
"flood-reduction": "boolean", Enable/disable flood reduction "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
},
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface {
"prefix": "string", IPv6 prefix format
"cost": "integer", Interface cost
range: "1..16777214"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
},
"cost": "integer", Interface cost
range: "1..65535"
"address": "string", Area ID if in IP address format
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync "out": "boolean" Enable out
}
},
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"stub": "boolean", Specify area as a stub area. Allowed only in\nnon-backbone areas "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
}
},
"flood-reduction": "boolean", Enable/disable flood reduction
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"detection-multiplier": "integer", Detect multiplier
range: "2..50"
"interval": "integer" Minimum interval between graceful restarts\n(seconds)
range: "3..30000"
units: "millisecond"
},
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "metric": "integer", OSPFv3 default metric
range: "0..16777214"
"default-info-originate": "boolean", Originate Type 7 default into NSSA area
"no-summary": [ null ], Do not send summary LSA into NSSA
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"no-redistribution": "boolean" No redistribution into this NSSA area
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"type7-translate-always": "boolean", Translate Type 7 to Type 5, even if not\nelected NSSA translator
"demand-circuit": "boolean", Enable/disable demand circuit operation
"default-cost": "integer", Set the summary default-cost of a NSSA/stub\narea
range: "0..16777215" {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Enable graceful restart
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"source-address": "string", Local sham-link endpoint
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"destination-address": "string", Remote sham-link endpoint "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
}
}
]
},
"priority": "integer" Specify router priority
range: "0..255"
}
], {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Enable graceful restart {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Enable graceful restart
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"virtual-link-address": "string", Router ID of virtual link neighbor "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
}
}
]
},
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface { {
"priority": "integer", Specify router priority
range: "0..255"
"neighbor-address": "string", IPV6 address
"cost": "integer", Interface cost
range: "1..65535"
"zone": "string", Zone
"database-filter": "boolean", Database filter
"poll-interval": "integer" OSPFv3 dead-router polling interval (in\nseconds)
range: "0..65535"
units: "second"
}
]
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Minimum interval between graceful restarts\n(seconds)
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
},
"enable": [ null ], Enable graceful restart
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface
"cost": "integer", Interface cost
range: "1..65535" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets
"interface-name": "string", Interface
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "out": "boolean" Enable out
}
},
"demand-circuit": "boolean", Enable/disable demand circuit operation
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
},
"flood-reduction": "boolean", Enable/disable flood reduction "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
},
"area-id": "integer", Area ID if in integer format
range: "0..4294967295" {
"prefix": "string", IPv6 prefix format
"cost": "integer", Interface cost
range: "1..16777214"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
},
"cost": "integer", Interface cost
range: "1..65535"
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync "out": "boolean" Enable out
}
},
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"stub": "boolean", Specify area as a stub area. Allowed only in\nnon-backbone areas "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
}
},
"flood-reduction": "boolean", Enable/disable flood reduction
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"detection-multiplier": "integer", Detect multiplier
range: "2..50"
"interval": "integer" Minimum interval between graceful restarts\n(seconds)
range: "3..30000"
units: "millisecond"
}, "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "metric": "integer", OSPFv3 default metric
range: "0..16777214"
"default-info-originate": "boolean", Originate Type 7 default into NSSA area
"no-summary": [ null ], Do not send summary LSA into NSSA
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"no-redistribution": "boolean" No redistribution into this NSSA area
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"type7-translate-always": "boolean", Translate Type 7 to Type 5, even if not\nelected NSSA translator
"demand-circuit": "boolean", Enable/disable demand circuit operation
"default-cost": "integer", Set the summary default-cost of a NSSA/stub\narea
range: "0..16777215" {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Enable graceful restart
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"source-address": "string", Local sham-link endpoint
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"destination-address": "string", Remote sham-link endpoint "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
}
}
]
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
},
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"cost": "integer", Interface cost
range: "1..65535" "priority": "enumeration" Specify router priority
Options:
critical
high
medium
low
}, "load-sharing-disable": [ null ], Disable load sharing between multiple backups
"priority": "enumeration", Specify router priority
Options:
critical
high
medium
low {
"tiebreaker-type": "enumeration", Tiebreaker type
Options:
downstream
line-card-disjoint
lowest-metric
node-protect
primary-path
secondary-path
srlg-disjoint
"tiebreaker-index": "integer" Index value for a tiebreaker
range: "1..255"
}
]
}
}
},
"spf-prefix-priority-disable": [ null ], SPF prefix prioritization disabled
"passive": "boolean", Enable/disable routing updates on an interface
"default-metric": "integer", OSPFv3 default metric
range: "1..16777214"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint
"router-id": "string", Specify the router ID for this OSPFv3 process in\nIPv4 address format "max-window-traps": "integer", Max number of traps sent in window time
range: "0..300"
"window-size": "integer" Trap rate limit sliding window size
range: "2..60"
},
"context": "string" SNMP context configuration
}, "enable": [ null ], Enable graceful restart
"strict-lsa-checking": [ null ], Terminate graceful restart helper mode if LSA\nchanged
"interval": "integer", Minimum interval between graceful restarts\n(seconds)
range: "90..3600"
units: "second"
"helper": [ null ], Disable router's helper support
"lifetime": "integer" Maximum route lifetime following restart\n(seconds)
range: "90..1800"
units: "second"
},
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"instance": "integer", Instance ID
range: "0..255" { {
"eigrp-route-type": "enumeration", EIGRP route type
Options:
internal
external
"default-metric": "integer", OSPFv3 default metric
range: "0..16777214"
"bgp-preserve-default-info": "boolean", Preserve Metric and Metric Type ofBGP Default\nRoute
"as-yy": "integer", 4-byte AS number in asdot (X.Y) format -\nsecond half (Y), or 2-byte AS number, or\n4-byte AS number in asplain format
range: "0..4294967295"
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"internal-route-type": "enumeration", Redistribute OSPFv3 routes
Options:
internal
"as-xx": "integer", 4-byte AS number in asdot (X.Y) format -\nfirst half (X)
range: "0..65535"
"preserve-med": "boolean", Preserve (Multi-Exit Discriminator) of BGP\nroutes
"tag": "integer", Tag for default route
range: "0..4294967295"
"use-rib-metric": "boolean", Use metric from RIB for redistributed routes
"isis-route-type": "enumeration", ISIS route type
Options:
level1
level2
level1-and2
"redistribute-route": "boolean", Redistribution of OSPFv3 routes
"external-route-type": "enumeration", Redistribute OSPFv3 external routes
Options:
external1
external2
external
"nssa-external-route-type": "enumeration", Redistribute OSPFv3 NSSA external routes
Options:
external1
external2
external
"route-policy-name": "string" Route policy to default-information\norigination
}
], {
"eigrp-route-type": "enumeration", EIGRP route type
Options:
internal
external
"default-metric": "integer", OSPFv3 default metric
range: "0..16777214"
"bgp-preserve-default-info": "boolean", Preserve Metric and Metric Type ofBGP Default\nRoute
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"process-name": "string", OSPFv3 process name
"internal-route-type": "enumeration", Redistribute OSPFv3 routes
Options:
internal
"preserve-med": "boolean", Preserve (Multi-Exit Discriminator) of BGP\nroutes
"tag": "integer", Tag for default route
range: "0..4294967295"
"use-rib-metric": "boolean", Use metric from RIB for redistributed routes
"isis-route-type": "enumeration", ISIS route type
Options:
level1
level2
level1-and2
"redistribute-route": "boolean", Redistribution of OSPFv3 routes
"external-route-type": "enumeration", Redistribute OSPFv3 external routes
Options:
external1
external2
external
"nssa-external-route-type": "enumeration", Redistribute OSPFv3 NSSA external routes
Options:
external1
external2
external
"route-policy-name": "string" Route policy to default-information\norigination
}
], {
"eigrp-route-type": "enumeration", EIGRP route type
Options:
internal
external
"default-metric": "integer", OSPFv3 default metric
range: "0..16777214"
"bgp-preserve-default-info": "boolean", Preserve Metric and Metric Type ofBGP Default\nRoute
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"internal-route-type": "enumeration", Redistribute OSPFv3 routes
Options:
internal
"as-xx": "integer", 4-byte AS number in asdot (X.Y) format -\nfirst half (X)
range: "0..65535"
"preserve-med": "boolean", Preserve (Multi-Exit Discriminator) of BGP\nroutes
"tag": "integer", Tag for default route
range: "0..4294967295"
"use-rib-metric": "boolean", Use metric from RIB for redistributed routes
"isis-route-type": "enumeration", ISIS route type
Options:
level1
level2
level1-and2
"redistribute-route": "boolean", Redistribution of OSPFv3 routes
"external-route-type": "enumeration", Redistribute OSPFv3 external routes
Options:
external1
external2
external
"nssa-external-route-type": "enumeration", Redistribute OSPFv3 NSSA external routes
Options:
external1
external2
external
"route-policy-name": "string" Route policy to default-information\norigination
}
],
"protocol-name": "enumeration", none
Options:
connected
static
bgp
isis
ospfv3
eigrp
subscriber
application
mobile "eigrp-route-type": "enumeration", EIGRP route type
Options:
internal
external
"default-metric": "integer", OSPFv3 default metric
range: "0..16777214"
"bgp-preserve-default-info": "boolean", Preserve Metric and Metric Type ofBGP Default\nRoute
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"internal-route-type": "enumeration", Redistribute OSPFv3 routes
Options:
internal
"preserve-med": "boolean", Preserve (Multi-Exit Discriminator) of BGP\nroutes
"tag": "integer", Tag for default route
range: "0..4294967295"
"use-rib-metric": "boolean", Use metric from RIB for redistributed routes
"isis-route-type": "enumeration", ISIS route type
Options:
level1
level2
level1-and2
"redistribute-route": "boolean", Redistribution of OSPFv3 routes
"external-route-type": "enumeration", Redistribute OSPFv3 external routes
Options:
external1
external2
external
"nssa-external-route-type": "enumeration", Redistribute OSPFv3 NSSA external routes
Options:
external1
external2
external
"route-policy-name": "string" Route policy to default-information\norigination
}
}
]
}, "vrf-lite": "boolean", Enable VRF Lite
"type7-translate-zero-forwarding-addr": "boolean", Enable capability to translate LSAs with fwd\naddr
"type7-prefer": "boolean" NSSA capability to prefer Type 7 over Type 5
},
"demand-circuit": "boolean", Enable/disable demand circuit operation
"spf-prefix-priority-policy": "string", Route policy for SPF prefix prioritization
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets "reference-bandwidth": "integer", Specify reference bandwidth for cost\ncomputations in terms of Mbits per second
range: "1..4294967"
units: "Mbit/s"
"disable": [ null ] Specify 'true' to assign cost based on\ninterface type
}, {
"all-or-connected-or-static-prefix-list": "string", Prefix-list name {
"prefix-list": "string", Filter prefixes based on an IPv6 prefix-list
"process-name": "string" OSPFv3 process name
}
],
"protocol-name": "enumeration", none
Options:
all
connected
static
bgp
isis
ospfv3
eigrp {
"as-xx": "integer", 4-byte AS number in asdot (X.Y) format -\nfirst half (X)
range: "1..65535"
"prefix-list": "string", Filter prefixes based on an IPv6 prefix-list
"as-yy": "integer" 4-byte AS number in asdot (X.Y) format -\nsecond half (Y), or 2-byte AS number, or\n4-byte AS number in asplain format
range: "0..4294967295"
}
], {
"as-xx": "integer", 4-byte AS number in asdot (X.Y) format -\nfirst half (X)
range: "1..65535"
"prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
]
}
]
}
},
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
}, "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000" "always": "boolean", Unconditionally enter stub router operational\nstate
"metric": "integer", OSPFv3 default metric
range: "0..16777214"
"tag": "integer", Tag for default route
range: "0..4294967295"
"metric-type": "integer", OSPFv3 metric type for default routes
"route-policy-name": "string" Route policy to default-information\norigination
}
}, "out": [ null ] Enable out
}
}, "administrative": "integer", Define an administrative distance
range: "1..255" "intra-area": "integer", Distance for intra-area routes
range: "1..255"
"external": "integer", Distance for external type 5 and type 7 routes
range: "1..255"
"inter-area": "integer" Distance for inter-area routes
range: "1..255"
}
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Minimum interval between graceful restarts\n(seconds)
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
}, "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "prefixes": "integer", Maximum number of prefixes redistributed to\nprotocol
range: "1..4294967295"
"threshold": "integer", Threshold value (%) at which to generate a\nwarning message
range: "1..100"
"warning-only": [ null ] Only give warning message when limit is\nexceeded
},
"interfaces": "integer", Specify maximum number of interfaces
range: "1..4294967295"
"paths": "integer" Specify maximum number of paths per route
range: "1..64"
}, "mospf": [ null ] Enable ignore of MOSPF type 6 LSA
}
}, "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
}
}, "arrival": "integer" The minimum interval in milliseconds between\naccepting the same LSA
range: "0..60000"
units: "millisecond"
}, "maximum-delay": "integer", Maximum delay between originating the same\nLSA in milliseconds
range: "1..600000"
"minimum-delay": "integer", Minimum delay between originating the same\nLSA in milliseconds
range: "1..600000"
"first-delay": "integer" Delay to generate first occurrence of LSA in\nmilliseconds
range: "1..600000"
}, "maximum-delay": "integer", Maximum delay between originating the same\nLSA in milliseconds
range: "1..600000"
units: "millisecond"
"minimum-delay": "integer", Minimum delay between originating the same\nLSA in milliseconds
range: "1..600000"
units: "millisecond"
"first-delay": "integer" Delay to generate first occurrence of LSA in\nmilliseconds
range: "0..600000"
units: "millisecond"
}
}, "flood": "integer", The minimum interval in milliseconds to pace\nlimit flooding on interface
range: "5..100"
units: "millisecond"
"retransmission": "integer", The minimum interval in msec between neighbor\nretransmissions
range: "5..100"
"lsa-group": "integer" Interval in seconds at which LSAs are grouped\nand refreshed, checksummed, or aged
range: "10..1800"
units: "second"
}
},
"log-adjacency-changes": "enumeration", Log changes in adjacency state
Options:
suppress
brief
detail "always": [ null ], Unconditionally enter stub router operational\nstate
"on-switchover": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second" "wait-for-bgp": "boolean", Wait until BGP converges (only applicable to\ndefault VRF)
"wait-time": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
},
"on-proc-migration": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
"on-proc-restart": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
}, "on-proc-restart": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second" "wait-for-bgp": "boolean", Wait until BGP converges (only applicable to\ndefault VRF)
"wait-time": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
},
"on-proc-migration": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
"always": [ null ], Unconditionally enter stub router operational\nstate
"include-stub": [ null ], Advertise stub links with maximum metric in stub\nrouter mode
"external-lsa": "integer", Advertise external LSAs with modified metric\nin stub router mode
range: "1..16777214"
default: "16711680"
"summary-lsa": "integer", Advertise summary LSAs with modified metric in\nstub router mode
range: "1..16777214"
default: "16711680"
"on-switchover": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
}, "on-proc-restart": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second" "wait-for-bgp": "boolean", Wait until BGP converges (only applicable to\ndefault VRF)
"wait-time": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
},
"on-proc-migration": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
"always": [ null ], Unconditionally enter stub router operational\nstate
"include-stub": [ null ], Advertise stub links with maximum metric in stub\nrouter mode
"on-switchover": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
}
},
"flood-reduction": "boolean", Enable/disable flood reduction
"priority": "integer" Specify router priority
range: "0..255"
}, { {
"prefix": "string", IPv6 prefix format
"tag": "integer", Tag for default route
range: "1..4294967295"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
}, {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Enable graceful restart {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Enable graceful restart
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"virtual-link-address": "string", Router ID of virtual link neighbor "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
}
}
]
},
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets { {
"priority": "integer", Specify router priority
range: "0..255"
"neighbor-address": "string", IPV6 address
"cost": "integer", Interface cost
range: "1..65535"
"zone": "string", Zone
"database-filter": "boolean", Database filter
"poll-interval": "integer" OSPFv3 dead-router polling interval (in\nseconds)
range: "0..65535"
units: "second"
}
]
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Minimum interval between graceful restarts\n(seconds)
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
},
"enable": [ null ], Enable graceful restart
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface
"cost": "integer", Interface cost
range: "1..65535" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets
"interface-name": "string", Interface
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "out": "boolean" Enable out
}
},
"demand-circuit": "boolean", Enable/disable demand circuit operation
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
},
"flood-reduction": "boolean", Enable/disable flood reduction "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
},
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface {
"prefix": "string", IPv6 prefix format
"cost": "integer", Interface cost
range: "1..16777214"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
},
"cost": "integer", Interface cost
range: "1..65535"
"address": "string", Area ID if in IP address format
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync "out": "boolean" Enable out
}
},
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"stub": "boolean", Specify area as a stub area. Allowed only in\nnon-backbone areas "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
}
},
"flood-reduction": "boolean", Enable/disable flood reduction
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"detection-multiplier": "integer", Detect multiplier
range: "2..50"
"interval": "integer" Minimum interval between graceful restarts\n(seconds)
range: "3..30000"
units: "millisecond"
},
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "metric": "integer", OSPFv3 default metric
range: "0..16777214"
"default-info-originate": "boolean", Originate Type 7 default into NSSA area
"no-summary": [ null ], Do not send summary LSA into NSSA
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"no-redistribution": "boolean" No redistribution into this NSSA area
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"type7-translate-always": "boolean", Translate Type 7 to Type 5, even if not\nelected NSSA translator
"demand-circuit": "boolean", Enable/disable demand circuit operation
"default-cost": "integer", Set the summary default-cost of a NSSA/stub\narea
range: "0..16777215" {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Enable graceful restart
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"source-address": "string", Local sham-link endpoint
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"destination-address": "string", Remote sham-link endpoint "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
}
}
]
},
"priority": "integer" Specify router priority
range: "0..255"
}
], {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Enable graceful restart {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Enable graceful restart
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"virtual-link-address": "string", Router ID of virtual link neighbor "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
}
}
]
},
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface { {
"priority": "integer", Specify router priority
range: "0..255"
"neighbor-address": "string", IPV6 address
"cost": "integer", Interface cost
range: "1..65535"
"zone": "string", Zone
"database-filter": "boolean", Database filter
"poll-interval": "integer" OSPFv3 dead-router polling interval (in\nseconds)
range: "0..65535"
units: "second"
}
]
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Minimum interval between graceful restarts\n(seconds)
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
},
"enable": [ null ], Enable graceful restart
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface
"cost": "integer", Interface cost
range: "1..65535" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets
"interface-name": "string", Interface
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "out": "boolean" Enable out
}
},
"demand-circuit": "boolean", Enable/disable demand circuit operation
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
},
"flood-reduction": "boolean", Enable/disable flood reduction "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
},
"area-id": "integer", Area ID if in integer format
range: "0..4294967295" {
"prefix": "string", IPv6 prefix format
"cost": "integer", Interface cost
range: "1..16777214"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
},
"cost": "integer", Interface cost
range: "1..65535"
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync "out": "boolean" Enable out
}
},
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"stub": "boolean", Specify area as a stub area. Allowed only in\nnon-backbone areas "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
}
},
"flood-reduction": "boolean", Enable/disable flood reduction
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"detection-multiplier": "integer", Detect multiplier
range: "2..50"
"interval": "integer" Minimum interval between graceful restarts\n(seconds)
range: "3..30000"
units: "millisecond"
}, "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "metric": "integer", OSPFv3 default metric
range: "0..16777214"
"default-info-originate": "boolean", Originate Type 7 default into NSSA area
"no-summary": [ null ], Do not send summary LSA into NSSA
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"no-redistribution": "boolean" No redistribution into this NSSA area
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"type7-translate-always": "boolean", Translate Type 7 to Type 5, even if not\nelected NSSA translator
"demand-circuit": "boolean", Enable/disable demand circuit operation
"default-cost": "integer", Set the summary default-cost of a NSSA/stub\narea
range: "0..16777215" {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Enable graceful restart
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"source-address": "string", Local sham-link endpoint
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"destination-address": "string", Remote sham-link endpoint "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
}
}
]
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
},
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second" "administrative": "integer", Define an administrative distance
range: "1..255" "intra-area": "integer", Distance for intra-area routes
range: "1..255"
"external": "integer", Distance for external type 5 and type 7 routes
range: "1..255"
"inter-area": "integer" Distance for inter-area routes
range: "1..255"
}
},
"cost": "integer", Interface cost
range: "1..65535" "priority": "enumeration" Specify router priority
Options:
critical
high
medium
low
}, "load-sharing-disable": [ null ], Disable load sharing between multiple backups
"priority": "enumeration", Specify router priority
Options:
critical
high
medium
low {
"tiebreaker-type": "enumeration", Tiebreaker type
Options:
downstream
line-card-disjoint
lowest-metric
node-protect
primary-path
secondary-path
srlg-disjoint
"tiebreaker-index": "integer" Index value for a tiebreaker
range: "1..255"
}
]
}
}
},
"priority": "integer", Specify router priority
range: "0..255"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"default-metric": "integer", OSPFv3 default metric
range: "1..16777214"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint
"router-id": "string", Specify the router ID for this OSPFv3 process in\nIPv4 address format "max-window-traps": "integer", Max number of traps sent in window time
range: "0..300"
"window-size": "integer" Trap rate limit sliding window size
range: "2..60"
},
"context": "string" SNMP context configuration
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255"
"vrf-name": "string", Name for this VRF "domain-id-name": "string", Secondary domain ID value
"domain-id-type": "enumeration" Secondary domain ID type
Options:
type0005
type0105
type0205
type8005
}, {
"domain-id-name": "string", Secondary domain ID value
"domain-id-type": "enumeration" Secondary domain ID type
Options:
type0005
type0105
type0205
type8005
}
]
}
}, { {
"eigrp-route-type": "enumeration", EIGRP route type
Options:
internal
external
"default-metric": "integer", OSPFv3 default metric
range: "0..16777214"
"bgp-preserve-default-info": "boolean", Preserve Metric and Metric Type ofBGP Default\nRoute
"as-yy": "integer", 4-byte AS number in asdot (X.Y) format -\nsecond half (Y), or 2-byte AS number, or\n4-byte AS number in asplain format
range: "0..4294967295"
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"internal-route-type": "enumeration", Redistribute OSPFv3 routes
Options:
internal
"as-xx": "integer", 4-byte AS number in asdot (X.Y) format -\nfirst half (X)
range: "0..65535"
"preserve-med": "boolean", Preserve (Multi-Exit Discriminator) of BGP\nroutes
"tag": "integer", Tag for default route
range: "0..4294967295"
"use-rib-metric": "boolean", Use metric from RIB for redistributed routes
"isis-route-type": "enumeration", ISIS route type
Options:
level1
level2
level1-and2
"redistribute-route": "boolean", Redistribution of OSPFv3 routes
"external-route-type": "enumeration", Redistribute OSPFv3 external routes
Options:
external1
external2
external
"nssa-external-route-type": "enumeration", Redistribute OSPFv3 NSSA external routes
Options:
external1
external2
external
"route-policy-name": "string" Route policy to default-information\norigination
}
], {
"eigrp-route-type": "enumeration", EIGRP route type
Options:
internal
external
"default-metric": "integer", OSPFv3 default metric
range: "0..16777214"
"bgp-preserve-default-info": "boolean", Preserve Metric and Metric Type ofBGP Default\nRoute
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"process-name": "string", OSPFv3 process name
"internal-route-type": "enumeration", Redistribute OSPFv3 routes
Options:
internal
"preserve-med": "boolean", Preserve (Multi-Exit Discriminator) of BGP\nroutes
"tag": "integer", Tag for default route
range: "0..4294967295"
"use-rib-metric": "boolean", Use metric from RIB for redistributed routes
"isis-route-type": "enumeration", ISIS route type
Options:
level1
level2
level1-and2
"redistribute-route": "boolean", Redistribution of OSPFv3 routes
"external-route-type": "enumeration", Redistribute OSPFv3 external routes
Options:
external1
external2
external
"nssa-external-route-type": "enumeration", Redistribute OSPFv3 NSSA external routes
Options:
external1
external2
external
"route-policy-name": "string" Route policy to default-information\norigination
}
], {
"eigrp-route-type": "enumeration", EIGRP route type
Options:
internal
external
"default-metric": "integer", OSPFv3 default metric
range: "0..16777214"
"bgp-preserve-default-info": "boolean", Preserve Metric and Metric Type ofBGP Default\nRoute
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"internal-route-type": "enumeration", Redistribute OSPFv3 routes
Options:
internal
"as-xx": "integer", 4-byte AS number in asdot (X.Y) format -\nfirst half (X)
range: "0..65535"
"preserve-med": "boolean", Preserve (Multi-Exit Discriminator) of BGP\nroutes
"tag": "integer", Tag for default route
range: "0..4294967295"
"use-rib-metric": "boolean", Use metric from RIB for redistributed routes
"isis-route-type": "enumeration", ISIS route type
Options:
level1
level2
level1-and2
"redistribute-route": "boolean", Redistribution of OSPFv3 routes
"external-route-type": "enumeration", Redistribute OSPFv3 external routes
Options:
external1
external2
external
"nssa-external-route-type": "enumeration", Redistribute OSPFv3 NSSA external routes
Options:
external1
external2
external
"route-policy-name": "string" Route policy to default-information\norigination
}
],
"protocol-name": "enumeration", none
Options:
connected
static
bgp
isis
ospfv3
eigrp
subscriber
application
mobile "eigrp-route-type": "enumeration", EIGRP route type
Options:
internal
external
"default-metric": "integer", OSPFv3 default metric
range: "0..16777214"
"bgp-preserve-default-info": "boolean", Preserve Metric and Metric Type ofBGP Default\nRoute
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"internal-route-type": "enumeration", Redistribute OSPFv3 routes
Options:
internal
"preserve-med": "boolean", Preserve (Multi-Exit Discriminator) of BGP\nroutes
"tag": "integer", Tag for default route
range: "0..4294967295"
"use-rib-metric": "boolean", Use metric from RIB for redistributed routes
"isis-route-type": "enumeration", ISIS route type
Options:
level1
level2
level1-and2
"redistribute-route": "boolean", Redistribution of OSPFv3 routes
"external-route-type": "enumeration", Redistribute OSPFv3 external routes
Options:
external1
external2
external
"nssa-external-route-type": "enumeration", Redistribute OSPFv3 NSSA external routes
Options:
external1
external2
external
"route-policy-name": "string" Route policy to default-information\norigination
}
}
]
}, "mospf": [ null ] Enable ignore of MOSPF type 6 LSA
}
},
"spf-prefix-priority-policy": "string", Route policy for SPF prefix prioritization
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second" "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface {
"all-or-connected-or-static-prefix-list": "string", Prefix-list name {
"prefix-list": "string", Filter prefixes based on an IPv6 prefix-list
"process-name": "string" OSPFv3 process name
}
],
"protocol-name": "enumeration", none
Options:
all
connected
static
bgp
isis
ospfv3
eigrp {
"as-xx": "integer", 4-byte AS number in asdot (X.Y) format -\nfirst half (X)
range: "1..65535"
"prefix-list": "string", Filter prefixes based on an IPv6 prefix-list
"as-yy": "integer" 4-byte AS number in asdot (X.Y) format -\nsecond half (Y), or 2-byte AS number, or\n4-byte AS number in asplain format
range: "0..4294967295"
}
], {
"as-xx": "integer", 4-byte AS number in asdot (X.Y) format -\nfirst half (X)
range: "1..65535"
"prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
]
}
]
}
}, "reference-bandwidth": "integer", Specify reference bandwidth for cost\ncomputations in terms of Mbits per second
range: "1..4294967"
units: "Mbit/s"
"disable": [ null ] Specify 'true' to assign cost based on\ninterface type
}, "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000" "always": "boolean", Unconditionally enter stub router operational\nstate
"metric": "integer", OSPFv3 default metric
range: "0..16777214"
"tag": "integer", Tag for default route
range: "0..4294967295"
"metric-type": "integer", OSPFv3 metric type for default routes
"route-policy-name": "string" Route policy to default-information\norigination
}
}, "out": [ null ] Enable out
}
},
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets
"demand-circuit": "boolean", Enable/disable demand circuit operation
"snmpvrf-trap": [ null ], Enable SNMP trap configuration in a VRF "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "prefixes": "integer", Maximum number of prefixes redistributed to\nprotocol
range: "1..4294967295"
"threshold": "integer", Threshold value (%) at which to generate a\nwarning message
range: "1..100"
"warning-only": [ null ] Only give warning message when limit is\nexceeded
},
"interfaces": "integer", Specify maximum number of interfaces
range: "1..4294967295"
"paths": "integer" Specify maximum number of paths per route
range: "1..64"
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Minimum interval between graceful restarts\n(seconds)
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
}, "vrf-lite": "boolean", Enable VRF Lite
"type7-translate-zero-forwarding-addr": "boolean", Enable capability to translate LSAs with fwd\naddr
"type7-prefer": "boolean" NSSA capability to prefer Type 7 over Type 5
}, "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
}
}, "arrival": "integer" The minimum interval in milliseconds between\naccepting the same LSA
range: "0..60000"
units: "millisecond"
}, "maximum-delay": "integer", Maximum delay between originating the same\nLSA in milliseconds
range: "1..600000"
"minimum-delay": "integer", Minimum delay between originating the same\nLSA in milliseconds
range: "1..600000"
"first-delay": "integer" Delay to generate first occurrence of LSA in\nmilliseconds
range: "1..600000"
}, "maximum-delay": "integer", Maximum delay between originating the same\nLSA in milliseconds
range: "1..600000"
units: "millisecond"
"minimum-delay": "integer", Minimum delay between originating the same\nLSA in milliseconds
range: "1..600000"
units: "millisecond"
"first-delay": "integer" Delay to generate first occurrence of LSA in\nmilliseconds
range: "0..600000"
units: "millisecond"
}
}, "flood": "integer", The minimum interval in milliseconds to pace\nlimit flooding on interface
range: "5..100"
units: "millisecond"
"retransmission": "integer", The minimum interval in msec between neighbor\nretransmissions
range: "5..100"
"lsa-group": "integer" Interval in seconds at which LSAs are grouped\nand refreshed, checksummed, or aged
range: "10..1800"
units: "second"
}
},
"log-adjacency-changes": "enumeration", Log changes in adjacency state
Options:
suppress
brief
detail "always": [ null ], Unconditionally enter stub router operational\nstate
"on-switchover": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second" "wait-for-bgp": "boolean", Wait until BGP converges (only applicable to\ndefault VRF)
"wait-time": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
},
"on-proc-migration": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
"on-proc-restart": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
}, "on-proc-restart": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second" "wait-for-bgp": "boolean", Wait until BGP converges (only applicable to\ndefault VRF)
"wait-time": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
},
"on-proc-migration": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
"always": [ null ], Unconditionally enter stub router operational\nstate
"include-stub": [ null ], Advertise stub links with maximum metric in stub\nrouter mode
"external-lsa": "integer", Advertise external LSAs with modified metric\nin stub router mode
range: "1..16777214"
default: "16711680"
"summary-lsa": "integer", Advertise summary LSAs with modified metric in\nstub router mode
range: "1..16777214"
default: "16711680"
"on-switchover": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
}, "on-proc-restart": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second" "wait-for-bgp": "boolean", Wait until BGP converges (only applicable to\ndefault VRF)
"wait-time": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
},
"on-proc-migration": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
"always": [ null ], Unconditionally enter stub router operational\nstate
"include-stub": [ null ], Advertise stub links with maximum metric in stub\nrouter mode
"on-switchover": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
}
},
"flood-reduction": "boolean", Enable/disable flood reduction "enable": [ null ], Enable graceful restart
"strict-lsa-checking": [ null ], Terminate graceful restart helper mode if LSA\nchanged
"interval": "integer", Minimum interval between graceful restarts\n(seconds)
range: "90..3600"
units: "second"
"helper": [ null ], Disable router's helper support
"lifetime": "integer" Maximum route lifetime following restart\n(seconds)
range: "90..1800"
units: "second"
}
}
]
}, "af-name": "enumeration", Address Family (AF) identifier
Options:
ipv6
"saf-name": "enumeration" Subsequent Address Family (SAF) identifier
Options:
unicast
}, {
"trace-buf-name": "string", Name for this trace buffer
"bufsize": "enumeration" Buffer size
Options:
size0
size256
size512
size1024
size2048
size4096
size8192
size16384
size32768
size65536
}
]
},
"protocol-shutdown": [ null ], Enable protocol shutdown
"process-name": "string", OSPFv3 process name
"nsr": "enumeration" Enable non-stop routing
Options:
true
false
}
}
Successful operation
Internal Error
Response Content-Types: application/json
PROCESS - Delete
Delete operation of resource: process
ID of process-name
Successful operation
Internal Error
Response Content-Types: application/json
PROCESS - Retrieve
Retrieve operation of resource: process
ID of process-name
Successful operation
Internal Error
Response Content-Types: application/json
Response Example (200 OK)
{ {
"prefix": "string", IPv6 prefix format
"tag": "integer", Tag for default route
range: "1..4294967295"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
}, {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Enable graceful restart {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Enable graceful restart
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"virtual-link-address": "string", Router ID of virtual link neighbor "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
}
}
]
},
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets { {
"priority": "integer", Specify router priority
range: "0..255"
"neighbor-address": "string", IPV6 address
"cost": "integer", Interface cost
range: "1..65535"
"zone": "string", Zone
"database-filter": "boolean", Database filter
"poll-interval": "integer" OSPFv3 dead-router polling interval (in\nseconds)
range: "0..65535"
units: "second"
}
]
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Minimum interval between graceful restarts\n(seconds)
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
},
"enable": [ null ], Enable graceful restart
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface
"cost": "integer", Interface cost
range: "1..65535" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets
"interface-name": "string", Interface
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "out": "boolean" Enable out
}
},
"demand-circuit": "boolean", Enable/disable demand circuit operation
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
},
"flood-reduction": "boolean", Enable/disable flood reduction "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
},
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface {
"prefix": "string", IPv6 prefix format
"cost": "integer", Interface cost
range: "1..16777214"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
},
"cost": "integer", Interface cost
range: "1..65535"
"address": "string", Area ID if in IP address format
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync "out": "boolean" Enable out
}
},
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"stub": "boolean", Specify area as a stub area. Allowed only in\nnon-backbone areas "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
}
},
"flood-reduction": "boolean", Enable/disable flood reduction
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"detection-multiplier": "integer", Detect multiplier
range: "2..50"
"interval": "integer" Minimum interval between graceful restarts\n(seconds)
range: "3..30000"
units: "millisecond"
},
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "metric": "integer", OSPFv3 default metric
range: "0..16777214"
"default-info-originate": "boolean", Originate Type 7 default into NSSA area
"no-summary": [ null ], Do not send summary LSA into NSSA
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"no-redistribution": "boolean" No redistribution into this NSSA area
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"type7-translate-always": "boolean", Translate Type 7 to Type 5, even if not\nelected NSSA translator
"demand-circuit": "boolean", Enable/disable demand circuit operation
"default-cost": "integer", Set the summary default-cost of a NSSA/stub\narea
range: "0..16777215" {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Enable graceful restart
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"source-address": "string", Local sham-link endpoint
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"destination-address": "string", Remote sham-link endpoint "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
}
}
]
},
"priority": "integer" Specify router priority
range: "0..255"
}
], {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Enable graceful restart {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Enable graceful restart
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"virtual-link-address": "string", Router ID of virtual link neighbor "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
}
}
]
},
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface { {
"priority": "integer", Specify router priority
range: "0..255"
"neighbor-address": "string", IPV6 address
"cost": "integer", Interface cost
range: "1..65535"
"zone": "string", Zone
"database-filter": "boolean", Database filter
"poll-interval": "integer" OSPFv3 dead-router polling interval (in\nseconds)
range: "0..65535"
units: "second"
}
]
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Minimum interval between graceful restarts\n(seconds)
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
},
"enable": [ null ], Enable graceful restart
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface
"cost": "integer", Interface cost
range: "1..65535" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets
"interface-name": "string", Interface
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "out": "boolean" Enable out
}
},
"demand-circuit": "boolean", Enable/disable demand circuit operation
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
},
"flood-reduction": "boolean", Enable/disable flood reduction "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
},
"area-id": "integer", Area ID if in integer format
range: "0..4294967295" {
"prefix": "string", IPv6 prefix format
"cost": "integer", Interface cost
range: "1..16777214"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
},
"cost": "integer", Interface cost
range: "1..65535"
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync "out": "boolean" Enable out
}
},
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"stub": "boolean", Specify area as a stub area. Allowed only in\nnon-backbone areas "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
}
},
"flood-reduction": "boolean", Enable/disable flood reduction
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"detection-multiplier": "integer", Detect multiplier
range: "2..50"
"interval": "integer" Minimum interval between graceful restarts\n(seconds)
range: "3..30000"
units: "millisecond"
}, "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "metric": "integer", OSPFv3 default metric
range: "0..16777214"
"default-info-originate": "boolean", Originate Type 7 default into NSSA area
"no-summary": [ null ], Do not send summary LSA into NSSA
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"no-redistribution": "boolean" No redistribution into this NSSA area
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"type7-translate-always": "boolean", Translate Type 7 to Type 5, even if not\nelected NSSA translator
"demand-circuit": "boolean", Enable/disable demand circuit operation
"default-cost": "integer", Set the summary default-cost of a NSSA/stub\narea
range: "0..16777215" {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Enable graceful restart
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"source-address": "string", Local sham-link endpoint
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"destination-address": "string", Remote sham-link endpoint "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
}
}
]
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
},
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"cost": "integer", Interface cost
range: "1..65535" "priority": "enumeration" Specify router priority
Options:
critical
high
medium
low
}, "load-sharing-disable": [ null ], Disable load sharing between multiple backups
"priority": "enumeration", Specify router priority
Options:
critical
high
medium
low {
"tiebreaker-type": "enumeration", Tiebreaker type
Options:
downstream
line-card-disjoint
lowest-metric
node-protect
primary-path
secondary-path
srlg-disjoint
"tiebreaker-index": "integer" Index value for a tiebreaker
range: "1..255"
}
]
}
}
},
"spf-prefix-priority-disable": [ null ], SPF prefix prioritization disabled
"passive": "boolean", Enable/disable routing updates on an interface
"default-metric": "integer", OSPFv3 default metric
range: "1..16777214"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint
"router-id": "string", Specify the router ID for this OSPFv3 process in\nIPv4 address format "max-window-traps": "integer", Max number of traps sent in window time
range: "0..300"
"window-size": "integer" Trap rate limit sliding window size
range: "2..60"
},
"context": "string" SNMP context configuration
}, "enable": [ null ], Enable graceful restart
"strict-lsa-checking": [ null ], Terminate graceful restart helper mode if LSA\nchanged
"interval": "integer", Minimum interval between graceful restarts\n(seconds)
range: "90..3600"
units: "second"
"helper": [ null ], Disable router's helper support
"lifetime": "integer" Maximum route lifetime following restart\n(seconds)
range: "90..1800"
units: "second"
},
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"instance": "integer", Instance ID
range: "0..255" { {
"eigrp-route-type": "enumeration", EIGRP route type
Options:
internal
external
"default-metric": "integer", OSPFv3 default metric
range: "0..16777214"
"bgp-preserve-default-info": "boolean", Preserve Metric and Metric Type ofBGP Default\nRoute
"as-yy": "integer", 4-byte AS number in asdot (X.Y) format -\nsecond half (Y), or 2-byte AS number, or\n4-byte AS number in asplain format
range: "0..4294967295"
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"internal-route-type": "enumeration", Redistribute OSPFv3 routes
Options:
internal
"as-xx": "integer", 4-byte AS number in asdot (X.Y) format -\nfirst half (X)
range: "0..65535"
"preserve-med": "boolean", Preserve (Multi-Exit Discriminator) of BGP\nroutes
"tag": "integer", Tag for default route
range: "0..4294967295"
"use-rib-metric": "boolean", Use metric from RIB for redistributed routes
"isis-route-type": "enumeration", ISIS route type
Options:
level1
level2
level1-and2
"redistribute-route": "boolean", Redistribution of OSPFv3 routes
"external-route-type": "enumeration", Redistribute OSPFv3 external routes
Options:
external1
external2
external
"nssa-external-route-type": "enumeration", Redistribute OSPFv3 NSSA external routes
Options:
external1
external2
external
"route-policy-name": "string" Route policy to default-information\norigination
}
], {
"eigrp-route-type": "enumeration", EIGRP route type
Options:
internal
external
"default-metric": "integer", OSPFv3 default metric
range: "0..16777214"
"bgp-preserve-default-info": "boolean", Preserve Metric and Metric Type ofBGP Default\nRoute
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"process-name": "string", OSPFv3 process name
"internal-route-type": "enumeration", Redistribute OSPFv3 routes
Options:
internal
"preserve-med": "boolean", Preserve (Multi-Exit Discriminator) of BGP\nroutes
"tag": "integer", Tag for default route
range: "0..4294967295"
"use-rib-metric": "boolean", Use metric from RIB for redistributed routes
"isis-route-type": "enumeration", ISIS route type
Options:
level1
level2
level1-and2
"redistribute-route": "boolean", Redistribution of OSPFv3 routes
"external-route-type": "enumeration", Redistribute OSPFv3 external routes
Options:
external1
external2
external
"nssa-external-route-type": "enumeration", Redistribute OSPFv3 NSSA external routes
Options:
external1
external2
external
"route-policy-name": "string" Route policy to default-information\norigination
}
], {
"eigrp-route-type": "enumeration", EIGRP route type
Options:
internal
external
"default-metric": "integer", OSPFv3 default metric
range: "0..16777214"
"bgp-preserve-default-info": "boolean", Preserve Metric and Metric Type ofBGP Default\nRoute
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"internal-route-type": "enumeration", Redistribute OSPFv3 routes
Options:
internal
"as-xx": "integer", 4-byte AS number in asdot (X.Y) format -\nfirst half (X)
range: "0..65535"
"preserve-med": "boolean", Preserve (Multi-Exit Discriminator) of BGP\nroutes
"tag": "integer", Tag for default route
range: "0..4294967295"
"use-rib-metric": "boolean", Use metric from RIB for redistributed routes
"isis-route-type": "enumeration", ISIS route type
Options:
level1
level2
level1-and2
"redistribute-route": "boolean", Redistribution of OSPFv3 routes
"external-route-type": "enumeration", Redistribute OSPFv3 external routes
Options:
external1
external2
external
"nssa-external-route-type": "enumeration", Redistribute OSPFv3 NSSA external routes
Options:
external1
external2
external
"route-policy-name": "string" Route policy to default-information\norigination
}
],
"protocol-name": "enumeration", none
Options:
connected
static
bgp
isis
ospfv3
eigrp
subscriber
application
mobile "eigrp-route-type": "enumeration", EIGRP route type
Options:
internal
external
"default-metric": "integer", OSPFv3 default metric
range: "0..16777214"
"bgp-preserve-default-info": "boolean", Preserve Metric and Metric Type ofBGP Default\nRoute
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"internal-route-type": "enumeration", Redistribute OSPFv3 routes
Options:
internal
"preserve-med": "boolean", Preserve (Multi-Exit Discriminator) of BGP\nroutes
"tag": "integer", Tag for default route
range: "0..4294967295"
"use-rib-metric": "boolean", Use metric from RIB for redistributed routes
"isis-route-type": "enumeration", ISIS route type
Options:
level1
level2
level1-and2
"redistribute-route": "boolean", Redistribution of OSPFv3 routes
"external-route-type": "enumeration", Redistribute OSPFv3 external routes
Options:
external1
external2
external
"nssa-external-route-type": "enumeration", Redistribute OSPFv3 NSSA external routes
Options:
external1
external2
external
"route-policy-name": "string" Route policy to default-information\norigination
}
}
]
}, "vrf-lite": "boolean", Enable VRF Lite
"type7-translate-zero-forwarding-addr": "boolean", Enable capability to translate LSAs with fwd\naddr
"type7-prefer": "boolean" NSSA capability to prefer Type 7 over Type 5
},
"demand-circuit": "boolean", Enable/disable demand circuit operation
"spf-prefix-priority-policy": "string", Route policy for SPF prefix prioritization
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets "reference-bandwidth": "integer", Specify reference bandwidth for cost\ncomputations in terms of Mbits per second
range: "1..4294967"
units: "Mbit/s"
"disable": [ null ] Specify 'true' to assign cost based on\ninterface type
}, {
"all-or-connected-or-static-prefix-list": "string", Prefix-list name {
"prefix-list": "string", Filter prefixes based on an IPv6 prefix-list
"process-name": "string" OSPFv3 process name
}
],
"protocol-name": "enumeration", none
Options:
all
connected
static
bgp
isis
ospfv3
eigrp {
"as-xx": "integer", 4-byte AS number in asdot (X.Y) format -\nfirst half (X)
range: "1..65535"
"prefix-list": "string", Filter prefixes based on an IPv6 prefix-list
"as-yy": "integer" 4-byte AS number in asdot (X.Y) format -\nsecond half (Y), or 2-byte AS number, or\n4-byte AS number in asplain format
range: "0..4294967295"
}
], {
"as-xx": "integer", 4-byte AS number in asdot (X.Y) format -\nfirst half (X)
range: "1..65535"
"prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
]
}
]
}
},
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
}, "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000" "always": "boolean", Unconditionally enter stub router operational\nstate
"metric": "integer", OSPFv3 default metric
range: "0..16777214"
"tag": "integer", Tag for default route
range: "0..4294967295"
"metric-type": "integer", OSPFv3 metric type for default routes
"route-policy-name": "string" Route policy to default-information\norigination
}
}, "out": [ null ] Enable out
}
}, "administrative": "integer", Define an administrative distance
range: "1..255" "intra-area": "integer", Distance for intra-area routes
range: "1..255"
"external": "integer", Distance for external type 5 and type 7 routes
range: "1..255"
"inter-area": "integer" Distance for inter-area routes
range: "1..255"
}
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Minimum interval between graceful restarts\n(seconds)
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
}, "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "prefixes": "integer", Maximum number of prefixes redistributed to\nprotocol
range: "1..4294967295"
"threshold": "integer", Threshold value (%) at which to generate a\nwarning message
range: "1..100"
"warning-only": [ null ] Only give warning message when limit is\nexceeded
},
"interfaces": "integer", Specify maximum number of interfaces
range: "1..4294967295"
"paths": "integer" Specify maximum number of paths per route
range: "1..64"
}, "mospf": [ null ] Enable ignore of MOSPF type 6 LSA
}
}, "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
}
}, "arrival": "integer" The minimum interval in milliseconds between\naccepting the same LSA
range: "0..60000"
units: "millisecond"
}, "maximum-delay": "integer", Maximum delay between originating the same\nLSA in milliseconds
range: "1..600000"
"minimum-delay": "integer", Minimum delay between originating the same\nLSA in milliseconds
range: "1..600000"
"first-delay": "integer" Delay to generate first occurrence of LSA in\nmilliseconds
range: "1..600000"
}, "maximum-delay": "integer", Maximum delay between originating the same\nLSA in milliseconds
range: "1..600000"
units: "millisecond"
"minimum-delay": "integer", Minimum delay between originating the same\nLSA in milliseconds
range: "1..600000"
units: "millisecond"
"first-delay": "integer" Delay to generate first occurrence of LSA in\nmilliseconds
range: "0..600000"
units: "millisecond"
}
}, "flood": "integer", The minimum interval in milliseconds to pace\nlimit flooding on interface
range: "5..100"
units: "millisecond"
"retransmission": "integer", The minimum interval in msec between neighbor\nretransmissions
range: "5..100"
"lsa-group": "integer" Interval in seconds at which LSAs are grouped\nand refreshed, checksummed, or aged
range: "10..1800"
units: "second"
}
},
"log-adjacency-changes": "enumeration", Log changes in adjacency state
Options:
suppress
brief
detail "always": [ null ], Unconditionally enter stub router operational\nstate
"on-switchover": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second" "wait-for-bgp": "boolean", Wait until BGP converges (only applicable to\ndefault VRF)
"wait-time": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
},
"on-proc-migration": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
"on-proc-restart": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
}, "on-proc-restart": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second" "wait-for-bgp": "boolean", Wait until BGP converges (only applicable to\ndefault VRF)
"wait-time": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
},
"on-proc-migration": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
"always": [ null ], Unconditionally enter stub router operational\nstate
"include-stub": [ null ], Advertise stub links with maximum metric in stub\nrouter mode
"external-lsa": "integer", Advertise external LSAs with modified metric\nin stub router mode
range: "1..16777214"
default: "16711680"
"summary-lsa": "integer", Advertise summary LSAs with modified metric in\nstub router mode
range: "1..16777214"
default: "16711680"
"on-switchover": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
}, "on-proc-restart": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second" "wait-for-bgp": "boolean", Wait until BGP converges (only applicable to\ndefault VRF)
"wait-time": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
},
"on-proc-migration": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
"always": [ null ], Unconditionally enter stub router operational\nstate
"include-stub": [ null ], Advertise stub links with maximum metric in stub\nrouter mode
"on-switchover": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
}
},
"flood-reduction": "boolean", Enable/disable flood reduction
"priority": "integer" Specify router priority
range: "0..255"
}, { {
"prefix": "string", IPv6 prefix format
"tag": "integer", Tag for default route
range: "1..4294967295"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
}, {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Enable graceful restart {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Enable graceful restart
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"virtual-link-address": "string", Router ID of virtual link neighbor "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
}
}
]
},
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets { {
"priority": "integer", Specify router priority
range: "0..255"
"neighbor-address": "string", IPV6 address
"cost": "integer", Interface cost
range: "1..65535"
"zone": "string", Zone
"database-filter": "boolean", Database filter
"poll-interval": "integer" OSPFv3 dead-router polling interval (in\nseconds)
range: "0..65535"
units: "second"
}
]
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Minimum interval between graceful restarts\n(seconds)
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
},
"enable": [ null ], Enable graceful restart
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface
"cost": "integer", Interface cost
range: "1..65535" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets
"interface-name": "string", Interface
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "out": "boolean" Enable out
}
},
"demand-circuit": "boolean", Enable/disable demand circuit operation
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
},
"flood-reduction": "boolean", Enable/disable flood reduction "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
},
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface {
"prefix": "string", IPv6 prefix format
"cost": "integer", Interface cost
range: "1..16777214"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
},
"cost": "integer", Interface cost
range: "1..65535"
"address": "string", Area ID if in IP address format
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync "out": "boolean" Enable out
}
},
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"stub": "boolean", Specify area as a stub area. Allowed only in\nnon-backbone areas "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
}
},
"flood-reduction": "boolean", Enable/disable flood reduction
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"detection-multiplier": "integer", Detect multiplier
range: "2..50"
"interval": "integer" Minimum interval between graceful restarts\n(seconds)
range: "3..30000"
units: "millisecond"
},
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "metric": "integer", OSPFv3 default metric
range: "0..16777214"
"default-info-originate": "boolean", Originate Type 7 default into NSSA area
"no-summary": [ null ], Do not send summary LSA into NSSA
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"no-redistribution": "boolean" No redistribution into this NSSA area
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"type7-translate-always": "boolean", Translate Type 7 to Type 5, even if not\nelected NSSA translator
"demand-circuit": "boolean", Enable/disable demand circuit operation
"default-cost": "integer", Set the summary default-cost of a NSSA/stub\narea
range: "0..16777215" {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Enable graceful restart
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"source-address": "string", Local sham-link endpoint
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"destination-address": "string", Remote sham-link endpoint "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
}
}
]
},
"priority": "integer" Specify router priority
range: "0..255"
}
], {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Enable graceful restart {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Enable graceful restart
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"virtual-link-address": "string", Router ID of virtual link neighbor "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
}
}
]
},
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface { {
"priority": "integer", Specify router priority
range: "0..255"
"neighbor-address": "string", IPV6 address
"cost": "integer", Interface cost
range: "1..65535"
"zone": "string", Zone
"database-filter": "boolean", Database filter
"poll-interval": "integer" OSPFv3 dead-router polling interval (in\nseconds)
range: "0..65535"
units: "second"
}
]
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Minimum interval between graceful restarts\n(seconds)
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
},
"enable": [ null ], Enable graceful restart
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface
"cost": "integer", Interface cost
range: "1..65535" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets
"interface-name": "string", Interface
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "out": "boolean" Enable out
}
},
"demand-circuit": "boolean", Enable/disable demand circuit operation
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
},
"flood-reduction": "boolean", Enable/disable flood reduction "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
},
"area-id": "integer", Area ID if in integer format
range: "0..4294967295" {
"prefix": "string", IPv6 prefix format
"cost": "integer", Interface cost
range: "1..16777214"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
},
"cost": "integer", Interface cost
range: "1..65535"
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync "out": "boolean" Enable out
}
},
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"stub": "boolean", Specify area as a stub area. Allowed only in\nnon-backbone areas "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
}
},
"flood-reduction": "boolean", Enable/disable flood reduction
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"detection-multiplier": "integer", Detect multiplier
range: "2..50"
"interval": "integer" Minimum interval between graceful restarts\n(seconds)
range: "3..30000"
units: "millisecond"
}, "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "metric": "integer", OSPFv3 default metric
range: "0..16777214"
"default-info-originate": "boolean", Originate Type 7 default into NSSA area
"no-summary": [ null ], Do not send summary LSA into NSSA
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"no-redistribution": "boolean" No redistribution into this NSSA area
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"type7-translate-always": "boolean", Translate Type 7 to Type 5, even if not\nelected NSSA translator
"demand-circuit": "boolean", Enable/disable demand circuit operation
"default-cost": "integer", Set the summary default-cost of a NSSA/stub\narea
range: "0..16777215" {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Enable graceful restart
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"source-address": "string", Local sham-link endpoint
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"destination-address": "string", Remote sham-link endpoint "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
}
}
]
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
},
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second" "administrative": "integer", Define an administrative distance
range: "1..255" "intra-area": "integer", Distance for intra-area routes
range: "1..255"
"external": "integer", Distance for external type 5 and type 7 routes
range: "1..255"
"inter-area": "integer" Distance for inter-area routes
range: "1..255"
}
},
"cost": "integer", Interface cost
range: "1..65535" "priority": "enumeration" Specify router priority
Options:
critical
high
medium
low
}, "load-sharing-disable": [ null ], Disable load sharing between multiple backups
"priority": "enumeration", Specify router priority
Options:
critical
high
medium
low {
"tiebreaker-type": "enumeration", Tiebreaker type
Options:
downstream
line-card-disjoint
lowest-metric
node-protect
primary-path
secondary-path
srlg-disjoint
"tiebreaker-index": "integer" Index value for a tiebreaker
range: "1..255"
}
]
}
}
},
"priority": "integer", Specify router priority
range: "0..255"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"default-metric": "integer", OSPFv3 default metric
range: "1..16777214"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint
"router-id": "string", Specify the router ID for this OSPFv3 process in\nIPv4 address format "max-window-traps": "integer", Max number of traps sent in window time
range: "0..300"
"window-size": "integer" Trap rate limit sliding window size
range: "2..60"
},
"context": "string" SNMP context configuration
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255"
"vrf-name": "string", Name for this VRF "domain-id-name": "string", Secondary domain ID value
"domain-id-type": "enumeration" Secondary domain ID type
Options:
type0005
type0105
type0205
type8005
}, {
"domain-id-name": "string", Secondary domain ID value
"domain-id-type": "enumeration" Secondary domain ID type
Options:
type0005
type0105
type0205
type8005
}
]
}
}, { {
"eigrp-route-type": "enumeration", EIGRP route type
Options:
internal
external
"default-metric": "integer", OSPFv3 default metric
range: "0..16777214"
"bgp-preserve-default-info": "boolean", Preserve Metric and Metric Type ofBGP Default\nRoute
"as-yy": "integer", 4-byte AS number in asdot (X.Y) format -\nsecond half (Y), or 2-byte AS number, or\n4-byte AS number in asplain format
range: "0..4294967295"
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"internal-route-type": "enumeration", Redistribute OSPFv3 routes
Options:
internal
"as-xx": "integer", 4-byte AS number in asdot (X.Y) format -\nfirst half (X)
range: "0..65535"
"preserve-med": "boolean", Preserve (Multi-Exit Discriminator) of BGP\nroutes
"tag": "integer", Tag for default route
range: "0..4294967295"
"use-rib-metric": "boolean", Use metric from RIB for redistributed routes
"isis-route-type": "enumeration", ISIS route type
Options:
level1
level2
level1-and2
"redistribute-route": "boolean", Redistribution of OSPFv3 routes
"external-route-type": "enumeration", Redistribute OSPFv3 external routes
Options:
external1
external2
external
"nssa-external-route-type": "enumeration", Redistribute OSPFv3 NSSA external routes
Options:
external1
external2
external
"route-policy-name": "string" Route policy to default-information\norigination
}
], {
"eigrp-route-type": "enumeration", EIGRP route type
Options:
internal
external
"default-metric": "integer", OSPFv3 default metric
range: "0..16777214"
"bgp-preserve-default-info": "boolean", Preserve Metric and Metric Type ofBGP Default\nRoute
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"process-name": "string", OSPFv3 process name
"internal-route-type": "enumeration", Redistribute OSPFv3 routes
Options:
internal
"preserve-med": "boolean", Preserve (Multi-Exit Discriminator) of BGP\nroutes
"tag": "integer", Tag for default route
range: "0..4294967295"
"use-rib-metric": "boolean", Use metric from RIB for redistributed routes
"isis-route-type": "enumeration", ISIS route type
Options:
level1
level2
level1-and2
"redistribute-route": "boolean", Redistribution of OSPFv3 routes
"external-route-type": "enumeration", Redistribute OSPFv3 external routes
Options:
external1
external2
external
"nssa-external-route-type": "enumeration", Redistribute OSPFv3 NSSA external routes
Options:
external1
external2
external
"route-policy-name": "string" Route policy to default-information\norigination
}
], {
"eigrp-route-type": "enumeration", EIGRP route type
Options:
internal
external
"default-metric": "integer", OSPFv3 default metric
range: "0..16777214"
"bgp-preserve-default-info": "boolean", Preserve Metric and Metric Type ofBGP Default\nRoute
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"internal-route-type": "enumeration", Redistribute OSPFv3 routes
Options:
internal
"as-xx": "integer", 4-byte AS number in asdot (X.Y) format -\nfirst half (X)
range: "0..65535"
"preserve-med": "boolean", Preserve (Multi-Exit Discriminator) of BGP\nroutes
"tag": "integer", Tag for default route
range: "0..4294967295"
"use-rib-metric": "boolean", Use metric from RIB for redistributed routes
"isis-route-type": "enumeration", ISIS route type
Options:
level1
level2
level1-and2
"redistribute-route": "boolean", Redistribution of OSPFv3 routes
"external-route-type": "enumeration", Redistribute OSPFv3 external routes
Options:
external1
external2
external
"nssa-external-route-type": "enumeration", Redistribute OSPFv3 NSSA external routes
Options:
external1
external2
external
"route-policy-name": "string" Route policy to default-information\norigination
}
],
"protocol-name": "enumeration", none
Options:
connected
static
bgp
isis
ospfv3
eigrp
subscriber
application
mobile "eigrp-route-type": "enumeration", EIGRP route type
Options:
internal
external
"default-metric": "integer", OSPFv3 default metric
range: "0..16777214"
"bgp-preserve-default-info": "boolean", Preserve Metric and Metric Type ofBGP Default\nRoute
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"internal-route-type": "enumeration", Redistribute OSPFv3 routes
Options:
internal
"preserve-med": "boolean", Preserve (Multi-Exit Discriminator) of BGP\nroutes
"tag": "integer", Tag for default route
range: "0..4294967295"
"use-rib-metric": "boolean", Use metric from RIB for redistributed routes
"isis-route-type": "enumeration", ISIS route type
Options:
level1
level2
level1-and2
"redistribute-route": "boolean", Redistribution of OSPFv3 routes
"external-route-type": "enumeration", Redistribute OSPFv3 external routes
Options:
external1
external2
external
"nssa-external-route-type": "enumeration", Redistribute OSPFv3 NSSA external routes
Options:
external1
external2
external
"route-policy-name": "string" Route policy to default-information\norigination
}
}
]
}, "mospf": [ null ] Enable ignore of MOSPF type 6 LSA
}
},
"spf-prefix-priority-policy": "string", Route policy for SPF prefix prioritization
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second" "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Enable graceful restart
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface {
"all-or-connected-or-static-prefix-list": "string", Prefix-list name {
"prefix-list": "string", Filter prefixes based on an IPv6 prefix-list
"process-name": "string" OSPFv3 process name
}
],
"protocol-name": "enumeration", none
Options:
all
connected
static
bgp
isis
ospfv3
eigrp {
"as-xx": "integer", 4-byte AS number in asdot (X.Y) format -\nfirst half (X)
range: "1..65535"
"prefix-list": "string", Filter prefixes based on an IPv6 prefix-list
"as-yy": "integer" 4-byte AS number in asdot (X.Y) format -\nsecond half (Y), or 2-byte AS number, or\n4-byte AS number in asplain format
range: "0..4294967295"
}
], {
"as-xx": "integer", 4-byte AS number in asdot (X.Y) format -\nfirst half (X)
range: "1..65535"
"prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
]
}
]
}
}, "reference-bandwidth": "integer", Specify reference bandwidth for cost\ncomputations in terms of Mbits per second
range: "1..4294967"
units: "Mbit/s"
"disable": [ null ] Specify 'true' to assign cost based on\ninterface type
}, "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Enable graceful restart
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000" "always": "boolean", Unconditionally enter stub router operational\nstate
"metric": "integer", OSPFv3 default metric
range: "0..16777214"
"tag": "integer", Tag for default route
range: "0..4294967295"
"metric-type": "integer", OSPFv3 metric type for default routes
"route-policy-name": "string" Route policy to default-information\norigination
}
}, "out": [ null ] Enable out
}
},
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets
"demand-circuit": "boolean", Enable/disable demand circuit operation
"snmpvrf-trap": [ null ], Enable SNMP trap configuration in a VRF "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "prefixes": "integer", Maximum number of prefixes redistributed to\nprotocol
range: "1..4294967295"
"threshold": "integer", Threshold value (%) at which to generate a\nwarning message
range: "1..100"
"warning-only": [ null ] Only give warning message when limit is\nexceeded
},
"interfaces": "integer", Specify maximum number of interfaces
range: "1..4294967295"
"paths": "integer" Specify maximum number of paths per route
range: "1..64"
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Minimum interval between graceful restarts\n(seconds)
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
}, "vrf-lite": "boolean", Enable VRF Lite
"type7-translate-zero-forwarding-addr": "boolean", Enable capability to translate LSAs with fwd\naddr
"type7-prefer": "boolean" NSSA capability to prefer Type 7 over Type 5
}, "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
}
}, "arrival": "integer" The minimum interval in milliseconds between\naccepting the same LSA
range: "0..60000"
units: "millisecond"
}, "maximum-delay": "integer", Maximum delay between originating the same\nLSA in milliseconds
range: "1..600000"
"minimum-delay": "integer", Minimum delay between originating the same\nLSA in milliseconds
range: "1..600000"
"first-delay": "integer" Delay to generate first occurrence of LSA in\nmilliseconds
range: "1..600000"
}, "maximum-delay": "integer", Maximum delay between originating the same\nLSA in milliseconds
range: "1..600000"
units: "millisecond"
"minimum-delay": "integer", Minimum delay between originating the same\nLSA in milliseconds
range: "1..600000"
units: "millisecond"
"first-delay": "integer" Delay to generate first occurrence of LSA in\nmilliseconds
range: "0..600000"
units: "millisecond"
}
}, "flood": "integer", The minimum interval in milliseconds to pace\nlimit flooding on interface
range: "5..100"
units: "millisecond"
"retransmission": "integer", The minimum interval in msec between neighbor\nretransmissions
range: "5..100"
"lsa-group": "integer" Interval in seconds at which LSAs are grouped\nand refreshed, checksummed, or aged
range: "10..1800"
units: "second"
}
},
"log-adjacency-changes": "enumeration", Log changes in adjacency state
Options:
suppress
brief
detail "always": [ null ], Unconditionally enter stub router operational\nstate
"on-switchover": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second" "wait-for-bgp": "boolean", Wait until BGP converges (only applicable to\ndefault VRF)
"wait-time": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
},
"on-proc-migration": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
"on-proc-restart": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
}, "on-proc-restart": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second" "wait-for-bgp": "boolean", Wait until BGP converges (only applicable to\ndefault VRF)
"wait-time": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
},
"on-proc-migration": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
"always": [ null ], Unconditionally enter stub router operational\nstate
"include-stub": [ null ], Advertise stub links with maximum metric in stub\nrouter mode
"external-lsa": "integer", Advertise external LSAs with modified metric\nin stub router mode
range: "1..16777214"
default: "16711680"
"summary-lsa": "integer", Advertise summary LSAs with modified metric in\nstub router mode
range: "1..16777214"
default: "16711680"
"on-switchover": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
}, "on-proc-restart": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second" "wait-for-bgp": "boolean", Wait until BGP converges (only applicable to\ndefault VRF)
"wait-time": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
},
"on-proc-migration": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
"always": [ null ], Unconditionally enter stub router operational\nstate
"include-stub": [ null ], Advertise stub links with maximum metric in stub\nrouter mode
"on-switchover": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
}
},
"flood-reduction": "boolean", Enable/disable flood reduction "enable": [ null ], Enable graceful restart
"strict-lsa-checking": [ null ], Terminate graceful restart helper mode if LSA\nchanged
"interval": "integer", Minimum interval between graceful restarts\n(seconds)
range: "90..3600"
units: "second"
"helper": [ null ], Disable router's helper support
"lifetime": "integer" Maximum route lifetime following restart\n(seconds)
range: "90..1800"
units: "second"
}
}
]
}, "af-name": "enumeration", Address Family (AF) identifier
Options:
ipv6
"saf-name": "enumeration" Subsequent Address Family (SAF) identifier
Options:
unicast
}, {
"trace-buf-name": "string", Name for this trace buffer
"bufsize": "enumeration" Buffer size
Options:
size0
size256
size512
size1024
size2048
size4096
size8192
size16384
size32768
size65536
}
]
},
"protocol-shutdown": [ null ], Enable protocol shutdown
"process-name": "string", OSPFv3 process name
"nsr": "enumeration" Enable non-stop routing
Options:
true
false
}
}
DEFAULT-VRF - Update
Update operation of resource: default-vrf
default-vrfbody object
ID of process-name
Request Content-Types: application/json
Request Example
{ {
"prefix": "string", IPv6 prefix format
"tag": "integer", Tag for default route
range: "1..4294967295"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
}, {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"virtual-link-address": "string", Router ID of virtual link neighbor "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
}
}
]
},
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets { {
"priority": "integer", Specify router priority
range: "0..255"
"neighbor-address": "string", IPV6 address
"cost": "integer", Interface cost
range: "1..65535"
"zone": "string", Zone
"database-filter": "boolean", Database filter
"poll-interval": "integer" OSPFv3 dead-router polling interval (in\nseconds)
range: "0..65535"
units: "second"
}
]
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
},
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface
"cost": "integer", Interface cost
range: "1..65535" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets
"interface-name": "string", Interface
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "out": "boolean" Enable out
}
},
"demand-circuit": "boolean", Enable/disable demand circuit operation
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
},
"flood-reduction": "boolean", Enable/disable flood reduction "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
},
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface {
"prefix": "string", IPv6 prefix format
"cost": "integer", Interface cost
range: "1..16777214"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
},
"cost": "integer", Interface cost
range: "1..65535"
"address": "string", Area ID if in IP address format
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync "out": "boolean" Enable out
}
},
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"stub": "boolean", Specify area as a stub area. Allowed only in\nnon-backbone areas "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
}
},
"flood-reduction": "boolean", Enable/disable flood reduction
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"detection-multiplier": "integer", Detect multiplier
range: "2..50"
"interval": "integer" Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
},
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "metric": "integer", OSPFv3 default metric
range: "0..16777214"
"default-info-originate": "boolean", Originate Type 7 default into NSSA area
"no-summary": [ null ], Do not send summary LSA into NSSA
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"no-redistribution": "boolean" No redistribution into this NSSA area
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"type7-translate-always": "boolean", Translate Type 7 to Type 5, even if not\nelected NSSA translator
"demand-circuit": "boolean", Enable/disable demand circuit operation
"default-cost": "integer", Set the summary default-cost of a NSSA/stub\narea
range: "0..16777215" {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"source-address": "string", Local sham-link endpoint
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"destination-address": "string", Remote sham-link endpoint "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
}
}
]
},
"priority": "integer" Specify router priority
range: "0..255"
}
], {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"virtual-link-address": "string", Router ID of virtual link neighbor "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
}
}
]
},
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface { {
"priority": "integer", Specify router priority
range: "0..255"
"neighbor-address": "string", IPV6 address
"cost": "integer", Interface cost
range: "1..65535"
"zone": "string", Zone
"database-filter": "boolean", Database filter
"poll-interval": "integer" OSPFv3 dead-router polling interval (in\nseconds)
range: "0..65535"
units: "second"
}
]
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
},
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface
"cost": "integer", Interface cost
range: "1..65535" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets
"interface-name": "string", Interface
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "out": "boolean" Enable out
}
},
"demand-circuit": "boolean", Enable/disable demand circuit operation
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
},
"flood-reduction": "boolean", Enable/disable flood reduction "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
},
"area-id": "integer", Area ID if in integer format
range: "0..4294967295" {
"prefix": "string", IPv6 prefix format
"cost": "integer", Interface cost
range: "1..16777214"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
},
"cost": "integer", Interface cost
range: "1..65535"
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync "out": "boolean" Enable out
}
},
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"stub": "boolean", Specify area as a stub area. Allowed only in\nnon-backbone areas "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
}
},
"flood-reduction": "boolean", Enable/disable flood reduction
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"detection-multiplier": "integer", Detect multiplier
range: "2..50"
"interval": "integer" Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
}, "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "metric": "integer", OSPFv3 default metric
range: "0..16777214"
"default-info-originate": "boolean", Originate Type 7 default into NSSA area
"no-summary": [ null ], Do not send summary LSA into NSSA
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"no-redistribution": "boolean" No redistribution into this NSSA area
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"type7-translate-always": "boolean", Translate Type 7 to Type 5, even if not\nelected NSSA translator
"demand-circuit": "boolean", Enable/disable demand circuit operation
"default-cost": "integer", Set the summary default-cost of a NSSA/stub\narea
range: "0..16777215" {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"source-address": "string", Local sham-link endpoint
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"destination-address": "string", Remote sham-link endpoint "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
}
}
]
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
},
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"cost": "integer", Interface cost
range: "1..65535" "priority": "enumeration" Specify router priority
Options:
critical
high
medium
low
}, "load-sharing-disable": [ null ], Disable load sharing between multiple backups
"priority": "enumeration", Specify router priority
Options:
critical
high
medium
low {
"tiebreaker-type": "enumeration", Tiebreaker type
Options:
downstream
line-card-disjoint
lowest-metric
node-protect
primary-path
secondary-path
srlg-disjoint
"tiebreaker-index": "integer" Index value for a tiebreaker
range: "1..255"
}
]
}
}
},
"spf-prefix-priority-disable": [ null ], SPF prefix prioritization disabled
"passive": "boolean", Enable/disable routing updates on an interface
"default-metric": "integer", OSPFv3 default metric
range: "1..16777214"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint
"router-id": "string", Specify the router ID for this OSPFv3 process in\nIPv4 address format "max-window-traps": "integer", Max number of traps sent in window time
range: "0..300"
"window-size": "integer" Trap rate limit sliding window size
range: "2..60"
},
"context": "string" SNMP context configuration
}, "enable": [ null ], Authenticate packets
"strict-lsa-checking": [ null ], Terminate graceful restart helper mode if LSA\nchanged
"interval": "integer", Hello interval in milli-seconds
range: "90..3600"
units: "second"
"helper": [ null ], Disable router's helper support
"lifetime": "integer" Maximum route lifetime following restart\n(seconds)
range: "90..1800"
units: "second"
},
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"instance": "integer", Instance ID
range: "0..255" { {
"eigrp-route-type": "enumeration", EIGRP route type
Options:
internal
external
"default-metric": "integer", OSPFv3 default metric
range: "0..16777214"
"bgp-preserve-default-info": "boolean", Preserve Metric and Metric Type ofBGP Default\nRoute
"as-yy": "integer", 4-byte AS number in asdot (X.Y) format -\nsecond half (Y), or 2-byte AS number, or\n4-byte AS number in asplain format
range: "0..4294967295"
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"internal-route-type": "enumeration", Redistribute OSPFv3 routes
Options:
internal
"as-xx": "integer", 4-byte AS number in asdot (X.Y) format -\nfirst half (X)
range: "0..65535"
"preserve-med": "boolean", Preserve (Multi-Exit Discriminator) of BGP\nroutes
"tag": "integer", Tag for default route
range: "0..4294967295"
"use-rib-metric": "boolean", Use metric from RIB for redistributed routes
"isis-route-type": "enumeration", ISIS route type
Options:
level1
level2
level1-and2
"redistribute-route": "boolean", Redistribution of OSPFv3 routes
"external-route-type": "enumeration", Redistribute OSPFv3 external routes
Options:
external1
external2
external
"nssa-external-route-type": "enumeration", Redistribute OSPFv3 NSSA external routes
Options:
external1
external2
external
"route-policy-name": "string" Route policy to default-information\norigination
}
], {
"eigrp-route-type": "enumeration", EIGRP route type
Options:
internal
external
"default-metric": "integer", OSPFv3 default metric
range: "0..16777214"
"bgp-preserve-default-info": "boolean", Preserve Metric and Metric Type ofBGP Default\nRoute
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"process-name": "string", If ISIS or OSPFv3, specify the instance name
"internal-route-type": "enumeration", Redistribute OSPFv3 routes
Options:
internal
"preserve-med": "boolean", Preserve (Multi-Exit Discriminator) of BGP\nroutes
"tag": "integer", Tag for default route
range: "0..4294967295"
"use-rib-metric": "boolean", Use metric from RIB for redistributed routes
"isis-route-type": "enumeration", ISIS route type
Options:
level1
level2
level1-and2
"redistribute-route": "boolean", Redistribution of OSPFv3 routes
"external-route-type": "enumeration", Redistribute OSPFv3 external routes
Options:
external1
external2
external
"nssa-external-route-type": "enumeration", Redistribute OSPFv3 NSSA external routes
Options:
external1
external2
external
"route-policy-name": "string" Route policy to default-information\norigination
}
], {
"eigrp-route-type": "enumeration", EIGRP route type
Options:
internal
external
"default-metric": "integer", OSPFv3 default metric
range: "0..16777214"
"bgp-preserve-default-info": "boolean", Preserve Metric and Metric Type ofBGP Default\nRoute
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"internal-route-type": "enumeration", Redistribute OSPFv3 routes
Options:
internal
"as-xx": "integer", 4-byte AS number in asdot (X.Y) format -\nfirst half (X)
range: "0..65535"
"preserve-med": "boolean", Preserve (Multi-Exit Discriminator) of BGP\nroutes
"tag": "integer", Tag for default route
range: "0..4294967295"
"use-rib-metric": "boolean", Use metric from RIB for redistributed routes
"isis-route-type": "enumeration", ISIS route type
Options:
level1
level2
level1-and2
"redistribute-route": "boolean", Redistribution of OSPFv3 routes
"external-route-type": "enumeration", Redistribute OSPFv3 external routes
Options:
external1
external2
external
"nssa-external-route-type": "enumeration", Redistribute OSPFv3 NSSA external routes
Options:
external1
external2
external
"route-policy-name": "string" Route policy to default-information\norigination
}
],
"protocol-name": "enumeration", none
Options:
connected
static
bgp
isis
ospfv3
eigrp
subscriber
application
mobile "eigrp-route-type": "enumeration", EIGRP route type
Options:
internal
external
"default-metric": "integer", OSPFv3 default metric
range: "0..16777214"
"bgp-preserve-default-info": "boolean", Preserve Metric and Metric Type ofBGP Default\nRoute
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"internal-route-type": "enumeration", Redistribute OSPFv3 routes
Options:
internal
"preserve-med": "boolean", Preserve (Multi-Exit Discriminator) of BGP\nroutes
"tag": "integer", Tag for default route
range: "0..4294967295"
"use-rib-metric": "boolean", Use metric from RIB for redistributed routes
"isis-route-type": "enumeration", ISIS route type
Options:
level1
level2
level1-and2
"redistribute-route": "boolean", Redistribution of OSPFv3 routes
"external-route-type": "enumeration", Redistribute OSPFv3 external routes
Options:
external1
external2
external
"nssa-external-route-type": "enumeration", Redistribute OSPFv3 NSSA external routes
Options:
external1
external2
external
"route-policy-name": "string" Route policy to default-information\norigination
}
}
]
}, "vrf-lite": "boolean", Enable VRF Lite
"type7-translate-zero-forwarding-addr": "boolean", Enable capability to translate LSAs with fwd\naddr
"type7-prefer": "boolean" NSSA capability to prefer Type 7 over Type 5
},
"demand-circuit": "boolean", Enable/disable demand circuit operation
"spf-prefix-priority-policy": "string", Route policy for SPF prefix prioritization
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets "reference-bandwidth": "integer", Specify reference bandwidth for cost\ncomputations in terms of Mbits per second
range: "1..4294967"
units: "Mbit/s"
"disable": [ null ] Specify 'true' to assign cost based on\ninterface type
}, {
"all-or-connected-or-static-prefix-list": "string", Prefix-list name {
"prefix-list": "string", Filter prefixes based on an IPv6 prefix-list
"process-name": "string" If ISIS or OSPFv3, specify the instance name
}
],
"protocol-name": "enumeration", none
Options:
all
connected
static
bgp
isis
ospfv3
eigrp {
"as-xx": "integer", 4-byte AS number in asdot (X.Y) format -\nfirst half (X)
range: "1..65535"
"prefix-list": "string", Filter prefixes based on an IPv6 prefix-list
"as-yy": "integer" 4-byte AS number in asdot (X.Y) format -\nsecond half (Y), or 2-byte AS number, or\n4-byte AS number in asplain format
range: "0..4294967295"
}
], {
"as-xx": "integer", 4-byte AS number in asdot (X.Y) format -\nfirst half (X)
range: "1..65535"
"prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
]
}
]
}
},
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
}, "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000" "always": "boolean", Unconditionally enter stub router operational\nstate
"metric": "integer", OSPFv3 default metric
range: "0..16777214"
"tag": "integer", Tag for default route
range: "0..4294967295"
"metric-type": "integer", OSPFv3 metric type for default routes
"route-policy-name": "string" Route policy to default-information\norigination
}
}, "out": [ null ] Enable out
}
}, "administrative": "integer", Define an administrative distance
range: "1..255" "intra-area": "integer", Distance for intra-area routes
range: "1..255"
"external": "integer", Distance for external type 5 and type 7 routes
range: "1..255"
"inter-area": "integer" Distance for inter-area routes
range: "1..255"
}
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
}, "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "prefixes": "integer", Maximum number of prefixes redistributed to\nprotocol
range: "1..4294967295"
"threshold": "integer", Threshold value (%) at which to generate a\nwarning message
range: "1..100"
"warning-only": [ null ] Only give warning message when limit is\nexceeded
},
"interfaces": "integer", Specify maximum number of interfaces
range: "1..4294967295"
"paths": "integer" Specify maximum number of paths per route
range: "1..64"
}, "mospf": [ null ] Enable ignore of MOSPF type 6 LSA
}
}, "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
}
}, "arrival": "integer" The minimum interval in milliseconds between\naccepting the same LSA
range: "0..60000"
units: "millisecond"
}, "maximum-delay": "integer", Maximum delay between originating the same\nLSA in milliseconds
range: "1..600000"
"minimum-delay": "integer", Minimum delay between originating the same\nLSA in milliseconds
range: "1..600000"
"first-delay": "integer" Delay to generate first occurrence of LSA in\nmilliseconds
range: "1..600000"
}, "maximum-delay": "integer", Maximum delay between originating the same\nLSA in milliseconds
range: "1..600000"
units: "millisecond"
"minimum-delay": "integer", Minimum delay between originating the same\nLSA in milliseconds
range: "1..600000"
units: "millisecond"
"first-delay": "integer" Delay to generate first occurrence of LSA in\nmilliseconds
range: "0..600000"
units: "millisecond"
}
}, "flood": "integer", The minimum interval in milliseconds to pace\nlimit flooding on interface
range: "5..100"
units: "millisecond"
"retransmission": "integer", The minimum interval in msec between neighbor\nretransmissions
range: "5..100"
"lsa-group": "integer" Interval in seconds at which LSAs are grouped\nand refreshed, checksummed, or aged
range: "10..1800"
units: "second"
}
},
"log-adjacency-changes": "enumeration", Log changes in adjacency state
Options:
suppress
brief
detail "always": [ null ], Unconditionally enter stub router operational\nstate
"on-switchover": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second" "wait-for-bgp": "boolean", Wait until BGP converges (only applicable to\ndefault VRF)
"wait-time": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
},
"on-proc-migration": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
"on-proc-restart": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
}, "on-proc-restart": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second" "wait-for-bgp": "boolean", Wait until BGP converges (only applicable to\ndefault VRF)
"wait-time": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
},
"on-proc-migration": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
"always": [ null ], Unconditionally enter stub router operational\nstate
"include-stub": [ null ], Advertise stub links with maximum metric in stub\nrouter mode
"external-lsa": "integer", Advertise external LSAs with modified metric\nin stub router mode
range: "1..16777214"
default: "16711680"
"summary-lsa": "integer", Advertise summary LSAs with modified metric in\nstub router mode
range: "1..16777214"
default: "16711680"
"on-switchover": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
}, "on-proc-restart": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second" "wait-for-bgp": "boolean", Wait until BGP converges (only applicable to\ndefault VRF)
"wait-time": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
},
"on-proc-migration": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
"always": [ null ], Unconditionally enter stub router operational\nstate
"include-stub": [ null ], Advertise stub links with maximum metric in stub\nrouter mode
"on-switchover": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
}
},
"flood-reduction": "boolean", Enable/disable flood reduction
"priority": "integer" Specify router priority
range: "0..255"
}
}
Successful operation
Internal Error
Response Content-Types: application/json
DEFAULT-VRF - Create
Create operation of resource: default-vrf
default-vrfbody object
ID of process-name
Request Content-Types: application/json
Request Example
{ {
"prefix": "string", IPv6 prefix format
"tag": "integer", Tag for default route
range: "1..4294967295"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
}, {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"virtual-link-address": "string", Router ID of virtual link neighbor "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
}
}
]
},
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets { {
"priority": "integer", Specify router priority
range: "0..255"
"neighbor-address": "string", IPV6 address
"cost": "integer", Interface cost
range: "1..65535"
"zone": "string", Zone
"database-filter": "boolean", Database filter
"poll-interval": "integer" OSPFv3 dead-router polling interval (in\nseconds)
range: "0..65535"
units: "second"
}
]
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
},
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface
"cost": "integer", Interface cost
range: "1..65535" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets
"interface-name": "string", Interface
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "out": "boolean" Enable out
}
},
"demand-circuit": "boolean", Enable/disable demand circuit operation
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
},
"flood-reduction": "boolean", Enable/disable flood reduction "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
},
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface {
"prefix": "string", IPv6 prefix format
"cost": "integer", Interface cost
range: "1..16777214"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
},
"cost": "integer", Interface cost
range: "1..65535"
"address": "string", Area ID if in IP address format
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync "out": "boolean" Enable out
}
},
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"stub": "boolean", Specify area as a stub area. Allowed only in\nnon-backbone areas "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
}
},
"flood-reduction": "boolean", Enable/disable flood reduction
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"detection-multiplier": "integer", Detect multiplier
range: "2..50"
"interval": "integer" Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
},
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "metric": "integer", OSPFv3 default metric
range: "0..16777214"
"default-info-originate": "boolean", Originate Type 7 default into NSSA area
"no-summary": [ null ], Do not send summary LSA into NSSA
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"no-redistribution": "boolean" No redistribution into this NSSA area
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"type7-translate-always": "boolean", Translate Type 7 to Type 5, even if not\nelected NSSA translator
"demand-circuit": "boolean", Enable/disable demand circuit operation
"default-cost": "integer", Set the summary default-cost of a NSSA/stub\narea
range: "0..16777215" {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"source-address": "string", Local sham-link endpoint
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"destination-address": "string", Remote sham-link endpoint "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
}
}
]
},
"priority": "integer" Specify router priority
range: "0..255"
}
], {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"virtual-link-address": "string", Router ID of virtual link neighbor "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
}
}
]
},
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface { {
"priority": "integer", Specify router priority
range: "0..255"
"neighbor-address": "string", IPV6 address
"cost": "integer", Interface cost
range: "1..65535"
"zone": "string", Zone
"database-filter": "boolean", Database filter
"poll-interval": "integer" OSPFv3 dead-router polling interval (in\nseconds)
range: "0..65535"
units: "second"
}
]
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
},
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface
"cost": "integer", Interface cost
range: "1..65535" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets
"interface-name": "string", Interface
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "out": "boolean" Enable out
}
},
"demand-circuit": "boolean", Enable/disable demand circuit operation
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
},
"flood-reduction": "boolean", Enable/disable flood reduction "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
},
"area-id": "integer", Area ID if in integer format
range: "0..4294967295" {
"prefix": "string", IPv6 prefix format
"cost": "integer", Interface cost
range: "1..16777214"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
},
"cost": "integer", Interface cost
range: "1..65535"
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync "out": "boolean" Enable out
}
},
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"stub": "boolean", Specify area as a stub area. Allowed only in\nnon-backbone areas "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
}
},
"flood-reduction": "boolean", Enable/disable flood reduction
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"detection-multiplier": "integer", Detect multiplier
range: "2..50"
"interval": "integer" Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
}, "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "metric": "integer", OSPFv3 default metric
range: "0..16777214"
"default-info-originate": "boolean", Originate Type 7 default into NSSA area
"no-summary": [ null ], Do not send summary LSA into NSSA
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"no-redistribution": "boolean" No redistribution into this NSSA area
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"type7-translate-always": "boolean", Translate Type 7 to Type 5, even if not\nelected NSSA translator
"demand-circuit": "boolean", Enable/disable demand circuit operation
"default-cost": "integer", Set the summary default-cost of a NSSA/stub\narea
range: "0..16777215" {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"source-address": "string", Local sham-link endpoint
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"destination-address": "string", Remote sham-link endpoint "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
}
}
]
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
},
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"cost": "integer", Interface cost
range: "1..65535" "priority": "enumeration" Specify router priority
Options:
critical
high
medium
low
}, "load-sharing-disable": [ null ], Disable load sharing between multiple backups
"priority": "enumeration", Specify router priority
Options:
critical
high
medium
low {
"tiebreaker-type": "enumeration", Tiebreaker type
Options:
downstream
line-card-disjoint
lowest-metric
node-protect
primary-path
secondary-path
srlg-disjoint
"tiebreaker-index": "integer" Index value for a tiebreaker
range: "1..255"
}
]
}
}
},
"spf-prefix-priority-disable": [ null ], SPF prefix prioritization disabled
"passive": "boolean", Enable/disable routing updates on an interface
"default-metric": "integer", OSPFv3 default metric
range: "1..16777214"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint
"router-id": "string", Specify the router ID for this OSPFv3 process in\nIPv4 address format "max-window-traps": "integer", Max number of traps sent in window time
range: "0..300"
"window-size": "integer" Trap rate limit sliding window size
range: "2..60"
},
"context": "string" SNMP context configuration
}, "enable": [ null ], Authenticate packets
"strict-lsa-checking": [ null ], Terminate graceful restart helper mode if LSA\nchanged
"interval": "integer", Hello interval in milli-seconds
range: "90..3600"
units: "second"
"helper": [ null ], Disable router's helper support
"lifetime": "integer" Maximum route lifetime following restart\n(seconds)
range: "90..1800"
units: "second"
},
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"instance": "integer", Instance ID
range: "0..255" { {
"eigrp-route-type": "enumeration", EIGRP route type
Options:
internal
external
"default-metric": "integer", OSPFv3 default metric
range: "0..16777214"
"bgp-preserve-default-info": "boolean", Preserve Metric and Metric Type ofBGP Default\nRoute
"as-yy": "integer", 4-byte AS number in asdot (X.Y) format -\nsecond half (Y), or 2-byte AS number, or\n4-byte AS number in asplain format
range: "0..4294967295"
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"internal-route-type": "enumeration", Redistribute OSPFv3 routes
Options:
internal
"as-xx": "integer", 4-byte AS number in asdot (X.Y) format -\nfirst half (X)
range: "0..65535"
"preserve-med": "boolean", Preserve (Multi-Exit Discriminator) of BGP\nroutes
"tag": "integer", Tag for default route
range: "0..4294967295"
"use-rib-metric": "boolean", Use metric from RIB for redistributed routes
"isis-route-type": "enumeration", ISIS route type
Options:
level1
level2
level1-and2
"redistribute-route": "boolean", Redistribution of OSPFv3 routes
"external-route-type": "enumeration", Redistribute OSPFv3 external routes
Options:
external1
external2
external
"nssa-external-route-type": "enumeration", Redistribute OSPFv3 NSSA external routes
Options:
external1
external2
external
"route-policy-name": "string" Route policy to default-information\norigination
}
], {
"eigrp-route-type": "enumeration", EIGRP route type
Options:
internal
external
"default-metric": "integer", OSPFv3 default metric
range: "0..16777214"
"bgp-preserve-default-info": "boolean", Preserve Metric and Metric Type ofBGP Default\nRoute
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"process-name": "string", If ISIS or OSPFv3, specify the instance name
"internal-route-type": "enumeration", Redistribute OSPFv3 routes
Options:
internal
"preserve-med": "boolean", Preserve (Multi-Exit Discriminator) of BGP\nroutes
"tag": "integer", Tag for default route
range: "0..4294967295"
"use-rib-metric": "boolean", Use metric from RIB for redistributed routes
"isis-route-type": "enumeration", ISIS route type
Options:
level1
level2
level1-and2
"redistribute-route": "boolean", Redistribution of OSPFv3 routes
"external-route-type": "enumeration", Redistribute OSPFv3 external routes
Options:
external1
external2
external
"nssa-external-route-type": "enumeration", Redistribute OSPFv3 NSSA external routes
Options:
external1
external2
external
"route-policy-name": "string" Route policy to default-information\norigination
}
], {
"eigrp-route-type": "enumeration", EIGRP route type
Options:
internal
external
"default-metric": "integer", OSPFv3 default metric
range: "0..16777214"
"bgp-preserve-default-info": "boolean", Preserve Metric and Metric Type ofBGP Default\nRoute
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"internal-route-type": "enumeration", Redistribute OSPFv3 routes
Options:
internal
"as-xx": "integer", 4-byte AS number in asdot (X.Y) format -\nfirst half (X)
range: "0..65535"
"preserve-med": "boolean", Preserve (Multi-Exit Discriminator) of BGP\nroutes
"tag": "integer", Tag for default route
range: "0..4294967295"
"use-rib-metric": "boolean", Use metric from RIB for redistributed routes
"isis-route-type": "enumeration", ISIS route type
Options:
level1
level2
level1-and2
"redistribute-route": "boolean", Redistribution of OSPFv3 routes
"external-route-type": "enumeration", Redistribute OSPFv3 external routes
Options:
external1
external2
external
"nssa-external-route-type": "enumeration", Redistribute OSPFv3 NSSA external routes
Options:
external1
external2
external
"route-policy-name": "string" Route policy to default-information\norigination
}
],
"protocol-name": "enumeration", none
Options:
connected
static
bgp
isis
ospfv3
eigrp
subscriber
application
mobile "eigrp-route-type": "enumeration", EIGRP route type
Options:
internal
external
"default-metric": "integer", OSPFv3 default metric
range: "0..16777214"
"bgp-preserve-default-info": "boolean", Preserve Metric and Metric Type ofBGP Default\nRoute
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"internal-route-type": "enumeration", Redistribute OSPFv3 routes
Options:
internal
"preserve-med": "boolean", Preserve (Multi-Exit Discriminator) of BGP\nroutes
"tag": "integer", Tag for default route
range: "0..4294967295"
"use-rib-metric": "boolean", Use metric from RIB for redistributed routes
"isis-route-type": "enumeration", ISIS route type
Options:
level1
level2
level1-and2
"redistribute-route": "boolean", Redistribution of OSPFv3 routes
"external-route-type": "enumeration", Redistribute OSPFv3 external routes
Options:
external1
external2
external
"nssa-external-route-type": "enumeration", Redistribute OSPFv3 NSSA external routes
Options:
external1
external2
external
"route-policy-name": "string" Route policy to default-information\norigination
}
}
]
}, "vrf-lite": "boolean", Enable VRF Lite
"type7-translate-zero-forwarding-addr": "boolean", Enable capability to translate LSAs with fwd\naddr
"type7-prefer": "boolean" NSSA capability to prefer Type 7 over Type 5
},
"demand-circuit": "boolean", Enable/disable demand circuit operation
"spf-prefix-priority-policy": "string", Route policy for SPF prefix prioritization
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets "reference-bandwidth": "integer", Specify reference bandwidth for cost\ncomputations in terms of Mbits per second
range: "1..4294967"
units: "Mbit/s"
"disable": [ null ] Specify 'true' to assign cost based on\ninterface type
}, {
"all-or-connected-or-static-prefix-list": "string", Prefix-list name {
"prefix-list": "string", Filter prefixes based on an IPv6 prefix-list
"process-name": "string" If ISIS or OSPFv3, specify the instance name
}
],
"protocol-name": "enumeration", none
Options:
all
connected
static
bgp
isis
ospfv3
eigrp {
"as-xx": "integer", 4-byte AS number in asdot (X.Y) format -\nfirst half (X)
range: "1..65535"
"prefix-list": "string", Filter prefixes based on an IPv6 prefix-list
"as-yy": "integer" 4-byte AS number in asdot (X.Y) format -\nsecond half (Y), or 2-byte AS number, or\n4-byte AS number in asplain format
range: "0..4294967295"
}
], {
"as-xx": "integer", 4-byte AS number in asdot (X.Y) format -\nfirst half (X)
range: "1..65535"
"prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
]
}
]
}
},
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
}, "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000" "always": "boolean", Unconditionally enter stub router operational\nstate
"metric": "integer", OSPFv3 default metric
range: "0..16777214"
"tag": "integer", Tag for default route
range: "0..4294967295"
"metric-type": "integer", OSPFv3 metric type for default routes
"route-policy-name": "string" Route policy to default-information\norigination
}
}, "out": [ null ] Enable out
}
}, "administrative": "integer", Define an administrative distance
range: "1..255" "intra-area": "integer", Distance for intra-area routes
range: "1..255"
"external": "integer", Distance for external type 5 and type 7 routes
range: "1..255"
"inter-area": "integer" Distance for inter-area routes
range: "1..255"
}
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
}, "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "prefixes": "integer", Maximum number of prefixes redistributed to\nprotocol
range: "1..4294967295"
"threshold": "integer", Threshold value (%) at which to generate a\nwarning message
range: "1..100"
"warning-only": [ null ] Only give warning message when limit is\nexceeded
},
"interfaces": "integer", Specify maximum number of interfaces
range: "1..4294967295"
"paths": "integer" Specify maximum number of paths per route
range: "1..64"
}, "mospf": [ null ] Enable ignore of MOSPF type 6 LSA
}
}, "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
}
}, "arrival": "integer" The minimum interval in milliseconds between\naccepting the same LSA
range: "0..60000"
units: "millisecond"
}, "maximum-delay": "integer", Maximum delay between originating the same\nLSA in milliseconds
range: "1..600000"
"minimum-delay": "integer", Minimum delay between originating the same\nLSA in milliseconds
range: "1..600000"
"first-delay": "integer" Delay to generate first occurrence of LSA in\nmilliseconds
range: "1..600000"
}, "maximum-delay": "integer", Maximum delay between originating the same\nLSA in milliseconds
range: "1..600000"
units: "millisecond"
"minimum-delay": "integer", Minimum delay between originating the same\nLSA in milliseconds
range: "1..600000"
units: "millisecond"
"first-delay": "integer" Delay to generate first occurrence of LSA in\nmilliseconds
range: "0..600000"
units: "millisecond"
}
}, "flood": "integer", The minimum interval in milliseconds to pace\nlimit flooding on interface
range: "5..100"
units: "millisecond"
"retransmission": "integer", The minimum interval in msec between neighbor\nretransmissions
range: "5..100"
"lsa-group": "integer" Interval in seconds at which LSAs are grouped\nand refreshed, checksummed, or aged
range: "10..1800"
units: "second"
}
},
"log-adjacency-changes": "enumeration", Log changes in adjacency state
Options:
suppress
brief
detail "always": [ null ], Unconditionally enter stub router operational\nstate
"on-switchover": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second" "wait-for-bgp": "boolean", Wait until BGP converges (only applicable to\ndefault VRF)
"wait-time": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
},
"on-proc-migration": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
"on-proc-restart": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
}, "on-proc-restart": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second" "wait-for-bgp": "boolean", Wait until BGP converges (only applicable to\ndefault VRF)
"wait-time": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
},
"on-proc-migration": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
"always": [ null ], Unconditionally enter stub router operational\nstate
"include-stub": [ null ], Advertise stub links with maximum metric in stub\nrouter mode
"external-lsa": "integer", Advertise external LSAs with modified metric\nin stub router mode
range: "1..16777214"
default: "16711680"
"summary-lsa": "integer", Advertise summary LSAs with modified metric in\nstub router mode
range: "1..16777214"
default: "16711680"
"on-switchover": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
}, "on-proc-restart": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second" "wait-for-bgp": "boolean", Wait until BGP converges (only applicable to\ndefault VRF)
"wait-time": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
},
"on-proc-migration": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
"always": [ null ], Unconditionally enter stub router operational\nstate
"include-stub": [ null ], Advertise stub links with maximum metric in stub\nrouter mode
"on-switchover": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
}
},
"flood-reduction": "boolean", Enable/disable flood reduction
"priority": "integer" Specify router priority
range: "0..255"
}
}
Successful operation
Internal Error
Response Content-Types: application/json
DEFAULT-VRF - Delete
Delete operation of resource: default-vrf
ID of process-name
Successful operation
Internal Error
Response Content-Types: application/json
DEFAULT-VRF - Retrieve
Retrieve operation of resource: default-vrf
ID of process-name
Successful operation
Internal Error
Response Content-Types: application/json
Response Example (200 OK)
{ {
"prefix": "string", IPv6 prefix format
"tag": "integer", Tag for default route
range: "1..4294967295"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
}, {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"virtual-link-address": "string", Router ID of virtual link neighbor "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
}
}
]
},
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets { {
"priority": "integer", Specify router priority
range: "0..255"
"neighbor-address": "string", IPV6 address
"cost": "integer", Interface cost
range: "1..65535"
"zone": "string", Zone
"database-filter": "boolean", Database filter
"poll-interval": "integer" OSPFv3 dead-router polling interval (in\nseconds)
range: "0..65535"
units: "second"
}
]
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
},
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface
"cost": "integer", Interface cost
range: "1..65535" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets
"interface-name": "string", Interface
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "out": "boolean" Enable out
}
},
"demand-circuit": "boolean", Enable/disable demand circuit operation
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
},
"flood-reduction": "boolean", Enable/disable flood reduction "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
},
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface {
"prefix": "string", IPv6 prefix format
"cost": "integer", Interface cost
range: "1..16777214"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
},
"cost": "integer", Interface cost
range: "1..65535"
"address": "string", Area ID if in IP address format
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync "out": "boolean" Enable out
}
},
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"stub": "boolean", Specify area as a stub area. Allowed only in\nnon-backbone areas "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
}
},
"flood-reduction": "boolean", Enable/disable flood reduction
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"detection-multiplier": "integer", Detect multiplier
range: "2..50"
"interval": "integer" Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
},
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "metric": "integer", OSPFv3 default metric
range: "0..16777214"
"default-info-originate": "boolean", Originate Type 7 default into NSSA area
"no-summary": [ null ], Do not send summary LSA into NSSA
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"no-redistribution": "boolean" No redistribution into this NSSA area
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"type7-translate-always": "boolean", Translate Type 7 to Type 5, even if not\nelected NSSA translator
"demand-circuit": "boolean", Enable/disable demand circuit operation
"default-cost": "integer", Set the summary default-cost of a NSSA/stub\narea
range: "0..16777215" {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"source-address": "string", Local sham-link endpoint
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"destination-address": "string", Remote sham-link endpoint "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
}
}
]
},
"priority": "integer" Specify router priority
range: "0..255"
}
], {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"virtual-link-address": "string", Router ID of virtual link neighbor "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
}
}
]
},
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface { {
"priority": "integer", Specify router priority
range: "0..255"
"neighbor-address": "string", IPV6 address
"cost": "integer", Interface cost
range: "1..65535"
"zone": "string", Zone
"database-filter": "boolean", Database filter
"poll-interval": "integer" OSPFv3 dead-router polling interval (in\nseconds)
range: "0..65535"
units: "second"
}
]
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
},
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface
"cost": "integer", Interface cost
range: "1..65535" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets
"interface-name": "string", Interface
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "out": "boolean" Enable out
}
},
"demand-circuit": "boolean", Enable/disable demand circuit operation
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
},
"flood-reduction": "boolean", Enable/disable flood reduction "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
},
"area-id": "integer", Area ID if in integer format
range: "0..4294967295" {
"prefix": "string", IPv6 prefix format
"cost": "integer", Interface cost
range: "1..16777214"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
},
"cost": "integer", Interface cost
range: "1..65535"
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync "out": "boolean" Enable out
}
},
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"stub": "boolean", Specify area as a stub area. Allowed only in\nnon-backbone areas "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
}
},
"flood-reduction": "boolean", Enable/disable flood reduction
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"detection-multiplier": "integer", Detect multiplier
range: "2..50"
"interval": "integer" Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
}, "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "metric": "integer", OSPFv3 default metric
range: "0..16777214"
"default-info-originate": "boolean", Originate Type 7 default into NSSA area
"no-summary": [ null ], Do not send summary LSA into NSSA
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"no-redistribution": "boolean" No redistribution into this NSSA area
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"type7-translate-always": "boolean", Translate Type 7 to Type 5, even if not\nelected NSSA translator
"demand-circuit": "boolean", Enable/disable demand circuit operation
"default-cost": "integer", Set the summary default-cost of a NSSA/stub\narea
range: "0..16777215" {
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"source-address": "string", Local sham-link endpoint
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"destination-address": "string", Remote sham-link endpoint "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
}
}
]
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
},
"dead-interval": "integer", Interval after which a neighbor is declared dead\n(in seconds)
range: "1..65535"
units: "second"
"cost": "integer", Interface cost
range: "1..65535" "priority": "enumeration" Specify router priority
Options:
critical
high
medium
low
}, "load-sharing-disable": [ null ], Disable load sharing between multiple backups
"priority": "enumeration", Specify router priority
Options:
critical
high
medium
low {
"tiebreaker-type": "enumeration", Tiebreaker type
Options:
downstream
line-card-disjoint
lowest-metric
node-protect
primary-path
secondary-path
srlg-disjoint
"tiebreaker-index": "integer" Index value for a tiebreaker
range: "1..255"
}
]
}
}
},
"spf-prefix-priority-disable": [ null ], SPF prefix prioritization disabled
"passive": "boolean", Enable/disable routing updates on an interface
"default-metric": "integer", OSPFv3 default metric
range: "1..16777214"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint
"router-id": "string", Specify the router ID for this OSPFv3 process in\nIPv4 address format "max-window-traps": "integer", Max number of traps sent in window time
range: "0..300"
"window-size": "integer" Trap rate limit sliding window size
range: "2..60"
},
"context": "string" SNMP context configuration
}, "enable": [ null ], Authenticate packets
"strict-lsa-checking": [ null ], Terminate graceful restart helper mode if LSA\nchanged
"interval": "integer", Hello interval in milli-seconds
range: "90..3600"
units: "second"
"helper": [ null ], Disable router's helper support
"lifetime": "integer" Maximum route lifetime following restart\n(seconds)
range: "90..1800"
units: "second"
},
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"instance": "integer", Instance ID
range: "0..255" { {
"eigrp-route-type": "enumeration", EIGRP route type
Options:
internal
external
"default-metric": "integer", OSPFv3 default metric
range: "0..16777214"
"bgp-preserve-default-info": "boolean", Preserve Metric and Metric Type ofBGP Default\nRoute
"as-yy": "integer", 4-byte AS number in asdot (X.Y) format -\nsecond half (Y), or 2-byte AS number, or\n4-byte AS number in asplain format
range: "0..4294967295"
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"internal-route-type": "enumeration", Redistribute OSPFv3 routes
Options:
internal
"as-xx": "integer", 4-byte AS number in asdot (X.Y) format -\nfirst half (X)
range: "0..65535"
"preserve-med": "boolean", Preserve (Multi-Exit Discriminator) of BGP\nroutes
"tag": "integer", Tag for default route
range: "0..4294967295"
"use-rib-metric": "boolean", Use metric from RIB for redistributed routes
"isis-route-type": "enumeration", ISIS route type
Options:
level1
level2
level1-and2
"redistribute-route": "boolean", Redistribution of OSPFv3 routes
"external-route-type": "enumeration", Redistribute OSPFv3 external routes
Options:
external1
external2
external
"nssa-external-route-type": "enumeration", Redistribute OSPFv3 NSSA external routes
Options:
external1
external2
external
"route-policy-name": "string" Route policy to default-information\norigination
}
], {
"eigrp-route-type": "enumeration", EIGRP route type
Options:
internal
external
"default-metric": "integer", OSPFv3 default metric
range: "0..16777214"
"bgp-preserve-default-info": "boolean", Preserve Metric and Metric Type ofBGP Default\nRoute
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"process-name": "string", If ISIS or OSPFv3, specify the instance name
"internal-route-type": "enumeration", Redistribute OSPFv3 routes
Options:
internal
"preserve-med": "boolean", Preserve (Multi-Exit Discriminator) of BGP\nroutes
"tag": "integer", Tag for default route
range: "0..4294967295"
"use-rib-metric": "boolean", Use metric from RIB for redistributed routes
"isis-route-type": "enumeration", ISIS route type
Options:
level1
level2
level1-and2
"redistribute-route": "boolean", Redistribution of OSPFv3 routes
"external-route-type": "enumeration", Redistribute OSPFv3 external routes
Options:
external1
external2
external
"nssa-external-route-type": "enumeration", Redistribute OSPFv3 NSSA external routes
Options:
external1
external2
external
"route-policy-name": "string" Route policy to default-information\norigination
}
], {
"eigrp-route-type": "enumeration", EIGRP route type
Options:
internal
external
"default-metric": "integer", OSPFv3 default metric
range: "0..16777214"
"bgp-preserve-default-info": "boolean", Preserve Metric and Metric Type ofBGP Default\nRoute
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"internal-route-type": "enumeration", Redistribute OSPFv3 routes
Options:
internal
"as-xx": "integer", 4-byte AS number in asdot (X.Y) format -\nfirst half (X)
range: "0..65535"
"preserve-med": "boolean", Preserve (Multi-Exit Discriminator) of BGP\nroutes
"tag": "integer", Tag for default route
range: "0..4294967295"
"use-rib-metric": "boolean", Use metric from RIB for redistributed routes
"isis-route-type": "enumeration", ISIS route type
Options:
level1
level2
level1-and2
"redistribute-route": "boolean", Redistribution of OSPFv3 routes
"external-route-type": "enumeration", Redistribute OSPFv3 external routes
Options:
external1
external2
external
"nssa-external-route-type": "enumeration", Redistribute OSPFv3 NSSA external routes
Options:
external1
external2
external
"route-policy-name": "string" Route policy to default-information\norigination
}
],
"protocol-name": "enumeration", none
Options:
connected
static
bgp
isis
ospfv3
eigrp
subscriber
application
mobile "eigrp-route-type": "enumeration", EIGRP route type
Options:
internal
external
"default-metric": "integer", OSPFv3 default metric
range: "0..16777214"
"bgp-preserve-default-info": "boolean", Preserve Metric and Metric Type ofBGP Default\nRoute
"metric-type": "enumeration", OSPFv3 metric type for default routes
Options:
type1
type2
"internal-route-type": "enumeration", Redistribute OSPFv3 routes
Options:
internal
"preserve-med": "boolean", Preserve (Multi-Exit Discriminator) of BGP\nroutes
"tag": "integer", Tag for default route
range: "0..4294967295"
"use-rib-metric": "boolean", Use metric from RIB for redistributed routes
"isis-route-type": "enumeration", ISIS route type
Options:
level1
level2
level1-and2
"redistribute-route": "boolean", Redistribution of OSPFv3 routes
"external-route-type": "enumeration", Redistribute OSPFv3 external routes
Options:
external1
external2
external
"nssa-external-route-type": "enumeration", Redistribute OSPFv3 NSSA external routes
Options:
external1
external2
external
"route-policy-name": "string" Route policy to default-information\norigination
}
}
]
}, "vrf-lite": "boolean", Enable VRF Lite
"type7-translate-zero-forwarding-addr": "boolean", Enable capability to translate LSAs with fwd\naddr
"type7-prefer": "boolean" NSSA capability to prefer Type 7 over Type 5
},
"demand-circuit": "boolean", Enable/disable demand circuit operation
"spf-prefix-priority-policy": "string", Route policy for SPF prefix prioritization
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD packets "reference-bandwidth": "integer", Specify reference bandwidth for cost\ncomputations in terms of Mbits per second
range: "1..4294967"
units: "Mbit/s"
"disable": [ null ] Specify 'true' to assign cost based on\ninterface type
}, {
"all-or-connected-or-static-prefix-list": "string", Prefix-list name {
"prefix-list": "string", Filter prefixes based on an IPv6 prefix-list
"process-name": "string" If ISIS or OSPFv3, specify the instance name
}
],
"protocol-name": "enumeration", none
Options:
all
connected
static
bgp
isis
ospfv3
eigrp {
"as-xx": "integer", 4-byte AS number in asdot (X.Y) format -\nfirst half (X)
range: "1..65535"
"prefix-list": "string", Filter prefixes based on an IPv6 prefix-list
"as-yy": "integer" 4-byte AS number in asdot (X.Y) format -\nsecond half (Y), or 2-byte AS number, or\n4-byte AS number in asplain format
range: "0..4294967295"
}
], {
"as-xx": "integer", 4-byte AS number in asdot (X.Y) format -\nfirst half (X)
range: "1..65535"
"prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
]
}
]
}
},
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface "spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
}, "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000" "always": "boolean", Unconditionally enter stub router operational\nstate
"metric": "integer", OSPFv3 default metric
range: "0..16777214"
"tag": "integer", Tag for default route
range: "0..4294967295"
"metric-type": "integer", OSPFv3 metric type for default routes
"route-policy-name": "string" Route policy to default-information\norigination
}
}, "out": [ null ] Enable out
}
}, "administrative": "integer", Define an administrative distance
range: "1..255" "intra-area": "integer", Distance for intra-area routes
range: "1..255"
"external": "integer", Distance for external type 5 and type 7 routes
range: "1..255"
"inter-area": "integer" Distance for inter-area routes
range: "1..255"
}
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
}, "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "prefixes": "integer", Maximum number of prefixes redistributed to\nprotocol
range: "1..4294967295"
"threshold": "integer", Threshold value (%) at which to generate a\nwarning message
range: "1..100"
"warning-only": [ null ] Only give warning message when limit is\nexceeded
},
"interfaces": "integer", Specify maximum number of interfaces
range: "1..4294967295"
"paths": "integer" Specify maximum number of paths per route
range: "1..64"
}, "mospf": [ null ] Enable ignore of MOSPF type 6 LSA
}
}, "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
}
}, "arrival": "integer" The minimum interval in milliseconds between\naccepting the same LSA
range: "0..60000"
units: "millisecond"
}, "maximum-delay": "integer", Maximum delay between originating the same\nLSA in milliseconds
range: "1..600000"
"minimum-delay": "integer", Minimum delay between originating the same\nLSA in milliseconds
range: "1..600000"
"first-delay": "integer" Delay to generate first occurrence of LSA in\nmilliseconds
range: "1..600000"
}, "maximum-delay": "integer", Maximum delay between originating the same\nLSA in milliseconds
range: "1..600000"
units: "millisecond"
"minimum-delay": "integer", Minimum delay between originating the same\nLSA in milliseconds
range: "1..600000"
units: "millisecond"
"first-delay": "integer" Delay to generate first occurrence of LSA in\nmilliseconds
range: "0..600000"
units: "millisecond"
}
}, "flood": "integer", The minimum interval in milliseconds to pace\nlimit flooding on interface
range: "5..100"
units: "millisecond"
"retransmission": "integer", The minimum interval in msec between neighbor\nretransmissions
range: "5..100"
"lsa-group": "integer" Interval in seconds at which LSAs are grouped\nand refreshed, checksummed, or aged
range: "10..1800"
units: "second"
}
},
"log-adjacency-changes": "enumeration", Log changes in adjacency state
Options:
suppress
brief
detail "always": [ null ], Unconditionally enter stub router operational\nstate
"on-switchover": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second" "wait-for-bgp": "boolean", Wait until BGP converges (only applicable to\ndefault VRF)
"wait-time": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
},
"on-proc-migration": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
"on-proc-restart": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
}, "on-proc-restart": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second" "wait-for-bgp": "boolean", Wait until BGP converges (only applicable to\ndefault VRF)
"wait-time": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
},
"on-proc-migration": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
"always": [ null ], Unconditionally enter stub router operational\nstate
"include-stub": [ null ], Advertise stub links with maximum metric in stub\nrouter mode
"external-lsa": "integer", Advertise external LSAs with modified metric\nin stub router mode
range: "1..16777214"
default: "16711680"
"summary-lsa": "integer", Advertise summary LSAs with modified metric in\nstub router mode
range: "1..16777214"
default: "16711680"
"on-switchover": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
}, "on-proc-restart": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second" "wait-for-bgp": "boolean", Wait until BGP converges (only applicable to\ndefault VRF)
"wait-time": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
},
"on-proc-migration": "integer", Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
"always": [ null ], Unconditionally enter stub router operational\nstate
"include-stub": [ null ], Advertise stub links with maximum metric in stub\nrouter mode
"on-switchover": "integer" Time (in seconds) to stay in stub router\noperational state
range: "5..86400"
units: "second"
}
},
"flood-reduction": "boolean", Enable/disable flood reduction
"priority": "integer" Specify router priority
range: "0..255"
}
}
AREA-ADDRESSES - Update
Update operation of resource: area-addresses
area-addressesbody object
ID of process-name
Request Content-Types: application/json
Request Example
{ {
"dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets {
"dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"virtual-link-address": "string", Router ID of virtual link neighbor "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
}
}
]
},
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD\npackets { {
"priority": "integer", Specify router priority
range: "0..255"
"neighbor-address": "string", IPV6 address
"cost": "integer", Interface cost
range: "1..65535"
"zone": "string", Zone
"database-filter": "boolean", Database filter
"poll-interval": "integer" OSPFv3 dead-router polling interval (in\nseconds)
range: "0..65535"
units: "second"
}
]
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
},
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface
"cost": "integer", Interface cost
range: "1..65535" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD\npackets
"interface-name": "string", Interface
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "out": "boolean" Enable or disable database-filter
}
},
"demand-circuit": "boolean", Enable/disable demand circuit operation
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
},
"flood-reduction": "boolean", Enable/disable flood reduction "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
},
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface {
"prefix": "string", IPv6 prefix format
"cost": "integer", Interface cost
range: "1..16777214"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
},
"cost": "integer", Interface cost
range: "1..65535"
"address": "string", Area ID if in IP address format
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync "out": "boolean" Enable or disable database-filter
}
},
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"stub": "boolean", Specify area as a stub area. Allowed only in\nnon-backbone areas "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
}
},
"flood-reduction": "boolean", Enable/disable flood reduction
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"detection-multiplier": "integer", Detect multiplier
range: "2..50"
"interval": "integer" Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
},
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "metric": "integer", Only valid with DefaultInfoOriginate
range: "0..16777214"
"default-info-originate": "boolean", Originate Type 7 default into NSSA area
"no-summary": [ null ], Do not send summary LSA into NSSA
"metric-type": "enumeration", Only valid with DefaultInfoOriginate
Options:
type1
type2
"no-redistribution": "boolean" No redistribution into this NSSA area
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"type7-translate-always": "boolean", Translate Type 7 to Type 5, even if not\nelected NSSA translator
"demand-circuit": "boolean", Enable/disable demand circuit operation
"default-cost": "integer", Set the summary default-cost of a NSSA/stub\narea
range: "0..16777215" {
"dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"source-address": "string", Local sham-link endpoint
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"destination-address": "string", Remote sham-link endpoint "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
}
}
]
},
"priority": "integer" Specify router priority
range: "0..255"
}
], {
"dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets {
"dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"virtual-link-address": "string", Router ID of virtual link neighbor "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
}
}
]
},
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD\npackets
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface { {
"priority": "integer", Specify router priority
range: "0..255"
"neighbor-address": "string", IPV6 address
"cost": "integer", Interface cost
range: "1..65535"
"zone": "string", Zone
"database-filter": "boolean", Database filter
"poll-interval": "integer" OSPFv3 dead-router polling interval (in\nseconds)
range: "0..65535"
units: "second"
}
]
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
},
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface
"cost": "integer", Interface cost
range: "1..65535" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD\npackets
"interface-name": "string", Interface
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "out": "boolean" Enable or disable database-filter
}
},
"demand-circuit": "boolean", Enable/disable demand circuit operation
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
},
"flood-reduction": "boolean", Enable/disable flood reduction "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
},
"area-id": "integer", Area ID if in integer format
range: "0..4294967295" {
"prefix": "string", IPv6 prefix format
"cost": "integer", Interface cost
range: "1..16777214"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
},
"cost": "integer", Interface cost
range: "1..65535"
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync "out": "boolean" Enable or disable database-filter
}
},
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"stub": "boolean", Specify area as a stub area. Allowed only in\nnon-backbone areas "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
}
},
"flood-reduction": "boolean", Enable/disable flood reduction
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"detection-multiplier": "integer", Detect multiplier
range: "2..50"
"interval": "integer" Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
}, "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "metric": "integer", Only valid with DefaultInfoOriginate
range: "0..16777214"
"default-info-originate": "boolean", Originate Type 7 default into NSSA area
"no-summary": [ null ], Do not send summary LSA into NSSA
"metric-type": "enumeration", Only valid with DefaultInfoOriginate
Options:
type1
type2
"no-redistribution": "boolean" No redistribution into this NSSA area
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"type7-translate-always": "boolean", Translate Type 7 to Type 5, even if not\nelected NSSA translator
"demand-circuit": "boolean", Enable/disable demand circuit operation
"default-cost": "integer", Set the summary default-cost of a NSSA/stub\narea
range: "0..16777215" {
"dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"source-address": "string", Local sham-link endpoint
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"destination-address": "string", Remote sham-link endpoint "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
}
}
]
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
}
}
Successful operation
Internal Error
Response Content-Types: application/json
AREA-ADDRESSES - Create
Create operation of resource: area-addresses
area-addressesbody object
ID of process-name
Request Content-Types: application/json
Request Example
{ {
"dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets {
"dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"virtual-link-address": "string", Router ID of virtual link neighbor "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
}
}
]
},
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD\npackets { {
"priority": "integer", Specify router priority
range: "0..255"
"neighbor-address": "string", IPV6 address
"cost": "integer", Interface cost
range: "1..65535"
"zone": "string", Zone
"database-filter": "boolean", Database filter
"poll-interval": "integer" OSPFv3 dead-router polling interval (in\nseconds)
range: "0..65535"
units: "second"
}
]
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
},
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface
"cost": "integer", Interface cost
range: "1..65535" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD\npackets
"interface-name": "string", Interface
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "out": "boolean" Enable or disable database-filter
}
},
"demand-circuit": "boolean", Enable/disable demand circuit operation
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
},
"flood-reduction": "boolean", Enable/disable flood reduction "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
},
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface {
"prefix": "string", IPv6 prefix format
"cost": "integer", Interface cost
range: "1..16777214"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
},
"cost": "integer", Interface cost
range: "1..65535"
"address": "string", Area ID if in IP address format
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync "out": "boolean" Enable or disable database-filter
}
},
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"stub": "boolean", Specify area as a stub area. Allowed only in\nnon-backbone areas "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
}
},
"flood-reduction": "boolean", Enable/disable flood reduction
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"detection-multiplier": "integer", Detect multiplier
range: "2..50"
"interval": "integer" Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
},
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "metric": "integer", Only valid with DefaultInfoOriginate
range: "0..16777214"
"default-info-originate": "boolean", Originate Type 7 default into NSSA area
"no-summary": [ null ], Do not send summary LSA into NSSA
"metric-type": "enumeration", Only valid with DefaultInfoOriginate
Options:
type1
type2
"no-redistribution": "boolean" No redistribution into this NSSA area
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"type7-translate-always": "boolean", Translate Type 7 to Type 5, even if not\nelected NSSA translator
"demand-circuit": "boolean", Enable/disable demand circuit operation
"default-cost": "integer", Set the summary default-cost of a NSSA/stub\narea
range: "0..16777215" {
"dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"source-address": "string", Local sham-link endpoint
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"destination-address": "string", Remote sham-link endpoint "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
}
}
]
},
"priority": "integer" Specify router priority
range: "0..255"
}
], {
"dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets {
"dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"virtual-link-address": "string", Router ID of virtual link neighbor "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
}
}
]
},
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD\npackets
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface { {
"priority": "integer", Specify router priority
range: "0..255"
"neighbor-address": "string", IPV6 address
"cost": "integer", Interface cost
range: "1..65535"
"zone": "string", Zone
"database-filter": "boolean", Database filter
"poll-interval": "integer" OSPFv3 dead-router polling interval (in\nseconds)
range: "0..65535"
units: "second"
}
]
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
},
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface
"cost": "integer", Interface cost
range: "1..65535" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD\npackets
"interface-name": "string", Interface
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "out": "boolean" Enable or disable database-filter
}
},
"demand-circuit": "boolean", Enable/disable demand circuit operation
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
},
"flood-reduction": "boolean", Enable/disable flood reduction "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
},
"area-id": "integer", Area ID if in integer format
range: "0..4294967295" {
"prefix": "string", IPv6 prefix format
"cost": "integer", Interface cost
range: "1..16777214"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
},
"cost": "integer", Interface cost
range: "1..65535"
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync "out": "boolean" Enable or disable database-filter
}
},
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"stub": "boolean", Specify area as a stub area. Allowed only in\nnon-backbone areas "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
}
},
"flood-reduction": "boolean", Enable/disable flood reduction
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"detection-multiplier": "integer", Detect multiplier
range: "2..50"
"interval": "integer" Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
}, "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "metric": "integer", Only valid with DefaultInfoOriginate
range: "0..16777214"
"default-info-originate": "boolean", Originate Type 7 default into NSSA area
"no-summary": [ null ], Do not send summary LSA into NSSA
"metric-type": "enumeration", Only valid with DefaultInfoOriginate
Options:
type1
type2
"no-redistribution": "boolean" No redistribution into this NSSA area
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"type7-translate-always": "boolean", Translate Type 7 to Type 5, even if not\nelected NSSA translator
"demand-circuit": "boolean", Enable/disable demand circuit operation
"default-cost": "integer", Set the summary default-cost of a NSSA/stub\narea
range: "0..16777215" {
"dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"source-address": "string", Local sham-link endpoint
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"destination-address": "string", Remote sham-link endpoint "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
}
}
]
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
}
}
Successful operation
Internal Error
Response Content-Types: application/json
AREA-ADDRESSES - Delete
Delete operation of resource: area-addresses
ID of process-name
Successful operation
Internal Error
Response Content-Types: application/json
AREA-ADDRESSES - Retrieve
Retrieve operation of resource: area-addresses
ID of process-name
Successful operation
Internal Error
Response Content-Types: application/json
Response Example (200 OK)
{ {
"dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets {
"dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"virtual-link-address": "string", Router ID of virtual link neighbor "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
}
}
]
},
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD\npackets { {
"priority": "integer", Specify router priority
range: "0..255"
"neighbor-address": "string", IPV6 address
"cost": "integer", Interface cost
range: "1..65535"
"zone": "string", Zone
"database-filter": "boolean", Database filter
"poll-interval": "integer" OSPFv3 dead-router polling interval (in\nseconds)
range: "0..65535"
units: "second"
}
]
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
},
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface
"cost": "integer", Interface cost
range: "1..65535" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD\npackets
"interface-name": "string", Interface
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "out": "boolean" Enable or disable database-filter
}
},
"demand-circuit": "boolean", Enable/disable demand circuit operation
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
},
"flood-reduction": "boolean", Enable/disable flood reduction "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
},
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface {
"prefix": "string", IPv6 prefix format
"cost": "integer", Interface cost
range: "1..16777214"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
},
"cost": "integer", Interface cost
range: "1..65535"
"address": "string", Area ID if in IP address format
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync "out": "boolean" Enable or disable database-filter
}
},
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"stub": "boolean", Specify area as a stub area. Allowed only in\nnon-backbone areas "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
}
},
"flood-reduction": "boolean", Enable/disable flood reduction
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"detection-multiplier": "integer", Detect multiplier
range: "2..50"
"interval": "integer" Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
},
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "metric": "integer", Only valid with DefaultInfoOriginate
range: "0..16777214"
"default-info-originate": "boolean", Originate Type 7 default into NSSA area
"no-summary": [ null ], Do not send summary LSA into NSSA
"metric-type": "enumeration", Only valid with DefaultInfoOriginate
Options:
type1
type2
"no-redistribution": "boolean" No redistribution into this NSSA area
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"type7-translate-always": "boolean", Translate Type 7 to Type 5, even if not\nelected NSSA translator
"demand-circuit": "boolean", Enable/disable demand circuit operation
"default-cost": "integer", Set the summary default-cost of a NSSA/stub\narea
range: "0..16777215" {
"dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"source-address": "string", Local sham-link endpoint
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"destination-address": "string", Remote sham-link endpoint "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
}
}
]
},
"priority": "integer" Specify router priority
range: "0..255"
}
], {
"dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets {
"dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"virtual-link-address": "string", Router ID of virtual link neighbor "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
}
}
]
},
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD\npackets
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface { {
"priority": "integer", Specify router priority
range: "0..255"
"neighbor-address": "string", IPV6 address
"cost": "integer", Interface cost
range: "1..65535"
"zone": "string", Zone
"database-filter": "boolean", Database filter
"poll-interval": "integer" OSPFv3 dead-router polling interval (in\nseconds)
range: "0..65535"
units: "second"
}
]
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
},
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface
"cost": "integer", Interface cost
range: "1..65535" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD\npackets
"interface-name": "string", Interface
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "out": "boolean" Enable or disable database-filter
}
},
"demand-circuit": "boolean", Enable/disable demand circuit operation
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
},
"flood-reduction": "boolean", Enable/disable flood reduction "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
},
"area-id": "integer", Area ID if in integer format
range: "0..4294967295" {
"prefix": "string", IPv6 prefix format
"cost": "integer", Interface cost
range: "1..16777214"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
},
"cost": "integer", Interface cost
range: "1..65535"
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync "out": "boolean" Enable or disable database-filter
}
},
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"stub": "boolean", Specify area as a stub area. Allowed only in\nnon-backbone areas "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
}
},
"flood-reduction": "boolean", Enable/disable flood reduction
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"detection-multiplier": "integer", Detect multiplier
range: "2..50"
"interval": "integer" Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
}, "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "metric": "integer", Only valid with DefaultInfoOriginate
range: "0..16777214"
"default-info-originate": "boolean", Originate Type 7 default into NSSA area
"no-summary": [ null ], Do not send summary LSA into NSSA
"metric-type": "enumeration", Only valid with DefaultInfoOriginate
Options:
type1
type2
"no-redistribution": "boolean" No redistribution into this NSSA area
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"type7-translate-always": "boolean", Translate Type 7 to Type 5, even if not\nelected NSSA translator
"demand-circuit": "boolean", Enable/disable demand circuit operation
"default-cost": "integer", Set the summary default-cost of a NSSA/stub\narea
range: "0..16777215" {
"dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"source-address": "string", Local sham-link endpoint
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"destination-address": "string", Remote sham-link endpoint "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
}
}
]
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
}
}
AREA-ADDRESS - Update
Update operation of resource: area-address
area-addressbody object
ID of process-name
ID of address
Request Content-Types: application/json
Request Example
{ "dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets {
"dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"virtual-link-address": "string", Router ID of virtual link neighbor "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
}
}
]
},
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD\npackets { {
"priority": "integer", Specify router priority
range: "0..255"
"neighbor-address": "string", IPV6 address
"cost": "integer", Interface cost
range: "1..65535"
"zone": "string", Zone
"database-filter": "boolean", Database filter
"poll-interval": "integer" OSPFv3 dead-router polling interval (in\nseconds)
range: "0..65535"
units: "second"
}
]
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
},
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface
"cost": "integer", Interface cost
range: "1..65535" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD\npackets
"interface-name": "string", Interface
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "out": "boolean" Enable or disable database-filter
}
},
"demand-circuit": "boolean", Enable/disable demand circuit operation
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
},
"flood-reduction": "boolean", Enable/disable flood reduction "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
},
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface {
"prefix": "string", IPv6 prefix format
"cost": "integer", Interface cost
range: "1..16777214"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
},
"cost": "integer", Interface cost
range: "1..65535"
"address": "string", Area ID if in IP address format
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync "out": "boolean" Enable or disable database-filter
}
},
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"stub": "boolean", Specify area as a stub area. Allowed only in\nnon-backbone areas "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
}
},
"flood-reduction": "boolean", Enable/disable flood reduction
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"detection-multiplier": "integer", Detect multiplier
range: "2..50"
"interval": "integer" Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
},
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "metric": "integer", Only valid with DefaultInfoOriginate
range: "0..16777214"
"default-info-originate": "boolean", Originate Type 7 default into NSSA area
"no-summary": [ null ], Do not send summary LSA into NSSA
"metric-type": "enumeration", Only valid with DefaultInfoOriginate
Options:
type1
type2
"no-redistribution": "boolean" No redistribution into this NSSA area
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"type7-translate-always": "boolean", Translate Type 7 to Type 5, even if not\nelected NSSA translator
"demand-circuit": "boolean", Enable/disable demand circuit operation
"default-cost": "integer", Set the summary default-cost of a NSSA/stub\narea
range: "0..16777215" {
"dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"source-address": "string", Local sham-link endpoint
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"destination-address": "string", Remote sham-link endpoint "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
}
}
]
},
"priority": "integer" Specify router priority
range: "0..255"
}
}
Successful operation
Internal Error
Response Content-Types: application/json
AREA-ADDRESS - Create
Create operation of resource: area-address
area-addressbody object
ID of process-name
ID of address
Request Content-Types: application/json
Request Example
{ "dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets {
"dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"virtual-link-address": "string", Router ID of virtual link neighbor "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
}
}
]
},
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD\npackets { {
"priority": "integer", Specify router priority
range: "0..255"
"neighbor-address": "string", IPV6 address
"cost": "integer", Interface cost
range: "1..65535"
"zone": "string", Zone
"database-filter": "boolean", Database filter
"poll-interval": "integer" OSPFv3 dead-router polling interval (in\nseconds)
range: "0..65535"
units: "second"
}
]
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
},
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface
"cost": "integer", Interface cost
range: "1..65535" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD\npackets
"interface-name": "string", Interface
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "out": "boolean" Enable or disable database-filter
}
},
"demand-circuit": "boolean", Enable/disable demand circuit operation
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
},
"flood-reduction": "boolean", Enable/disable flood reduction "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
},
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface {
"prefix": "string", IPv6 prefix format
"cost": "integer", Interface cost
range: "1..16777214"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
},
"cost": "integer", Interface cost
range: "1..65535"
"address": "string", Area ID if in IP address format
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync "out": "boolean" Enable or disable database-filter
}
},
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"stub": "boolean", Specify area as a stub area. Allowed only in\nnon-backbone areas "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
}
},
"flood-reduction": "boolean", Enable/disable flood reduction
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"detection-multiplier": "integer", Detect multiplier
range: "2..50"
"interval": "integer" Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
},
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "metric": "integer", Only valid with DefaultInfoOriginate
range: "0..16777214"
"default-info-originate": "boolean", Originate Type 7 default into NSSA area
"no-summary": [ null ], Do not send summary LSA into NSSA
"metric-type": "enumeration", Only valid with DefaultInfoOriginate
Options:
type1
type2
"no-redistribution": "boolean" No redistribution into this NSSA area
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"type7-translate-always": "boolean", Translate Type 7 to Type 5, even if not\nelected NSSA translator
"demand-circuit": "boolean", Enable/disable demand circuit operation
"default-cost": "integer", Set the summary default-cost of a NSSA/stub\narea
range: "0..16777215" {
"dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"source-address": "string", Local sham-link endpoint
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"destination-address": "string", Remote sham-link endpoint "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
}
}
]
},
"priority": "integer" Specify router priority
range: "0..255"
}
}
Successful operation
Internal Error
Response Content-Types: application/json
AREA-ADDRESS - Delete
Delete operation of resource: area-address
ID of process-name
ID of address
Successful operation
Internal Error
Response Content-Types: application/json
AREA-ADDRESS - Retrieve
Retrieve operation of resource: area-address
ID of process-name
ID of address
Successful operation
Internal Error
Response Content-Types: application/json
Response Example (200 OK)
{ "dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets {
"dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"virtual-link-address": "string", Router ID of virtual link neighbor "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
}
}
]
},
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD\npackets { {
"priority": "integer", Specify router priority
range: "0..255"
"neighbor-address": "string", IPV6 address
"cost": "integer", Interface cost
range: "1..65535"
"zone": "string", Zone
"database-filter": "boolean", Database filter
"poll-interval": "integer" OSPFv3 dead-router polling interval (in\nseconds)
range: "0..65535"
units: "second"
}
]
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
},
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface
"cost": "integer", Interface cost
range: "1..65535" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD\npackets
"interface-name": "string", Interface
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "out": "boolean" Enable or disable database-filter
}
},
"demand-circuit": "boolean", Enable/disable demand circuit operation
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
},
"flood-reduction": "boolean", Enable/disable flood reduction "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
},
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface {
"prefix": "string", IPv6 prefix format
"cost": "integer", Interface cost
range: "1..16777214"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
},
"cost": "integer", Interface cost
range: "1..65535"
"address": "string", Area ID if in IP address format
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync "out": "boolean" Enable or disable database-filter
}
},
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second" "prefix-list": "string" Filter prefixes based on an IPv6 prefix-list
}
},
"stub": "boolean", Specify area as a stub area. Allowed only in\nnon-backbone areas "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
}
},
"flood-reduction": "boolean", Enable/disable flood reduction
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"detection-multiplier": "integer", Detect multiplier
range: "2..50"
"interval": "integer" Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
},
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "metric": "integer", Only valid with DefaultInfoOriginate
range: "0..16777214"
"default-info-originate": "boolean", Originate Type 7 default into NSSA area
"no-summary": [ null ], Do not send summary LSA into NSSA
"metric-type": "enumeration", Only valid with DefaultInfoOriginate
Options:
type1
type2
"no-redistribution": "boolean" No redistribution into this NSSA area
},
"passive": "boolean", Enable/disable routing updates on an interface
"instance": "integer", Instance ID
range: "0..255" "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"type7-translate-always": "boolean", Translate Type 7 to Type 5, even if not\nelected NSSA translator
"demand-circuit": "boolean", Enable/disable demand circuit operation
"default-cost": "integer", Set the summary default-cost of a NSSA/stub\narea
range: "0..16777215" {
"dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"source-address": "string", Local sham-link endpoint
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second"
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"destination-address": "string", Remote sham-link endpoint "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
}
}
]
},
"priority": "integer" Specify router priority
range: "0..255"
}
}
AUTHENTICATION - Update
Update operation of resource: authentication
authenticationbody object
ID of process-name
ID of address
Request Content-Types: application/json
Request Example
{ "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
}
}
Successful operation
Internal Error
Response Content-Types: application/json
AUTHENTICATION - Create
Create operation of resource: authentication
authenticationbody object
ID of process-name
ID of address
Request Content-Types: application/json
Request Example
{ "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
}
}
Successful operation
Internal Error
Response Content-Types: application/json
AUTHENTICATION - Delete
Delete operation of resource: authentication
ID of process-name
ID of address
Successful operation
Internal Error
Response Content-Types: application/json
AUTHENTICATION - Retrieve
Retrieve operation of resource: authentication
ID of process-name
ID of address
Successful operation
Internal Error
Response Content-Types: application/json
Response Example (200 OK)
{ "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
}
}
BFD - Update
Update operation of resource: bfd
bfdbody object
ID of process-name
ID of address
Request Content-Types: application/json
Request Example
{ "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"detection-multiplier": "integer", Detect multiplier
range: "2..50"
"interval": "integer" Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
}
}
Successful operation
Internal Error
Response Content-Types: application/json
BFD - Create
Create operation of resource: bfd
bfdbody object
ID of process-name
ID of address
Request Content-Types: application/json
Request Example
{ "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"detection-multiplier": "integer", Detect multiplier
range: "2..50"
"interval": "integer" Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
}
}
Successful operation
Internal Error
Response Content-Types: application/json
BFD - Delete
Delete operation of resource: bfd
ID of process-name
ID of address
Successful operation
Internal Error
Response Content-Types: application/json
BFD - Retrieve
Retrieve operation of resource: bfd
ID of process-name
ID of address
Successful operation
Internal Error
Response Content-Types: application/json
Response Example (200 OK)
{ "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"detection-multiplier": "integer", Detect multiplier
range: "2..50"
"interval": "integer" Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
}
}
RANGES - Update
Update operation of resource: ranges
rangesbody object
ID of process-name
ID of address
Request Content-Types: application/json
Request Example
{ {
"prefix": "string", IPv6 prefix format
"cost": "integer", Specified metric for this range
range: "1..16777214"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
}
}
Successful operation
Internal Error
Response Content-Types: application/json
RANGES - Create
Create operation of resource: ranges
rangesbody object
ID of process-name
ID of address
Request Content-Types: application/json
Request Example
{ {
"prefix": "string", IPv6 prefix format
"cost": "integer", Specified metric for this range
range: "1..16777214"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
}
}
Successful operation
Internal Error
Response Content-Types: application/json
RANGES - Delete
Delete operation of resource: ranges
ID of process-name
ID of address
Successful operation
Internal Error
Response Content-Types: application/json
RANGES - Retrieve
Retrieve operation of resource: ranges
ID of process-name
ID of address
Successful operation
Internal Error
Response Content-Types: application/json
Response Example (200 OK)
{ {
"prefix": "string", IPv6 prefix format
"cost": "integer", Specified metric for this range
range: "1..16777214"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
}
}
RANGE - Update
Update operation of resource: range
rangebody object
ID of process-name
ID of address
ID of prefix prefix-length
Request Content-Types: application/json
Request Example
{ {
"prefix": "string", IPv6 prefix format
"cost": "integer", Specified metric for this range
range: "1..16777214"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
}
Successful operation
Internal Error
Response Content-Types: application/json
RANGE - Create
Create operation of resource: range
rangebody object
ID of process-name
ID of address
ID of prefix prefix-length
Request Content-Types: application/json
Request Example
{ {
"prefix": "string", IPv6 prefix format
"cost": "integer", Specified metric for this range
range: "1..16777214"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
}
Successful operation
Internal Error
Response Content-Types: application/json
RANGE - Delete
Delete operation of resource: range
ID of process-name
ID of address
ID of prefix prefix-length
Successful operation
Internal Error
Response Content-Types: application/json
RANGE - Retrieve
Retrieve operation of resource: range
ID of process-name
ID of address
ID of prefix prefix-length
Successful operation
Internal Error
Response Content-Types: application/json
Response Example (200 OK)
{ {
"prefix": "string", IPv6 prefix format
"cost": "integer", Specified metric for this range
range: "1..16777214"
"prefix-length": "string", IPV6 prefix length
"not-advertise": "boolean" Do not advertise address range
}
]
}
ENCRYPTION - Update
Update operation of resource: encryption
encryptionbody object
ID of process-name
ID of address
Request Content-Types: application/json
Request Example
{ "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
}
}
Successful operation
Internal Error
Response Content-Types: application/json
ENCRYPTION - Create
Create operation of resource: encryption
encryptionbody object
ID of process-name
ID of address
Request Content-Types: application/json
Request Example
{ "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
}
}
Successful operation
Internal Error
Response Content-Types: application/json
ENCRYPTION - Delete
Delete operation of resource: encryption
ID of process-name
ID of address
Successful operation
Internal Error
Response Content-Types: application/json
ENCRYPTION - Retrieve
Retrieve operation of resource: encryption
ID of process-name
ID of address
Successful operation
Internal Error
Response Content-Types: application/json
Response Example (200 OK)
{ "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec ESP authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
}
}
NSSA - Update
Update operation of resource: nssa
nssabody object
ID of process-name
ID of address
Request Content-Types: application/json
Request Example
{ "metric": "integer", Only valid with DefaultInfoOriginate
range: "0..16777214"
"default-info-originate": "boolean", Originate Type 7 default into NSSA area
"no-summary": [ null ], Do not send summary LSA into NSSA
"metric-type": "enumeration", Only valid with DefaultInfoOriginate
Options:
type1
type2
"no-redistribution": "boolean" No redistribution into this NSSA area
}
}
Successful operation
Internal Error
Response Content-Types: application/json
NSSA - Create
Create operation of resource: nssa
nssabody object
ID of process-name
ID of address
Request Content-Types: application/json
Request Example
{ "metric": "integer", Only valid with DefaultInfoOriginate
range: "0..16777214"
"default-info-originate": "boolean", Originate Type 7 default into NSSA area
"no-summary": [ null ], Do not send summary LSA into NSSA
"metric-type": "enumeration", Only valid with DefaultInfoOriginate
Options:
type1
type2
"no-redistribution": "boolean" No redistribution into this NSSA area
}
}
Successful operation
Internal Error
Response Content-Types: application/json
NSSA - Delete
Delete operation of resource: nssa
ID of process-name
ID of address
Successful operation
Internal Error
Response Content-Types: application/json
NSSA - Retrieve
Retrieve operation of resource: nssa
ID of process-name
ID of address
Successful operation
Internal Error
Response Content-Types: application/json
Response Example (200 OK)
{ "metric": "integer", Only valid with DefaultInfoOriginate
range: "0..16777214"
"default-info-originate": "boolean", Originate Type 7 default into NSSA area
"no-summary": [ null ], Do not send summary LSA into NSSA
"metric-type": "enumeration", Only valid with DefaultInfoOriginate
Options:
type1
type2
"no-redistribution": "boolean" No redistribution into this NSSA area
}
}
DATABASE-FILTER - Update
Update operation of resource: database-filter
database-filterbody object
ID of process-name
ID of address
Successful operation
Internal Error
Response Content-Types: application/json
DATABASE-FILTER - Create
Create operation of resource: database-filter
database-filterbody object
ID of process-name
ID of address
Successful operation
Internal Error
Response Content-Types: application/json
DATABASE-FILTER - Delete
Delete operation of resource: database-filter
ID of process-name
ID of address
Successful operation
Internal Error
Response Content-Types: application/json
DATABASE-FILTER - Retrieve
Retrieve operation of resource: database-filter
ID of process-name
ID of address
ALL - Update
Update operation of resource: all
allbody object
ID of process-name
ID of address
Successful operation
Internal Error
Response Content-Types: application/json
ALL - Create
Create operation of resource: all
allbody object
ID of process-name
ID of address
Successful operation
Internal Error
Response Content-Types: application/json
ALL - Delete
Delete operation of resource: all
ID of process-name
ID of address
Successful operation
Internal Error
Response Content-Types: application/json
ALL - Retrieve
Retrieve operation of resource: all
ID of process-name
ID of address
Successful operation
Internal Error
DISTRIBUTE-LIST - Update
Update operation of resource: distribute-list
distribute-listbody object
ID of process-name
ID of address
Successful operation
Internal Error
Response Content-Types: application/json
DISTRIBUTE-LIST - Create
Create operation of resource: distribute-list
distribute-listbody object
ID of process-name
ID of address
Successful operation
Internal Error
Response Content-Types: application/json
DISTRIBUTE-LIST - Delete
Delete operation of resource: distribute-list
ID of process-name
ID of address
Successful operation
Internal Error
Response Content-Types: application/json
DISTRIBUTE-LIST - Retrieve
Retrieve operation of resource: distribute-list
ID of process-name
ID of address
Successful operation
Internal Error
IN - Update
Update operation of resource: in
inbody object
ID of process-name
ID of address
Successful operation
Internal Error
Response Content-Types: application/json
IN - Create
Create operation of resource: in
inbody object
ID of process-name
ID of address
Successful operation
Internal Error
Response Content-Types: application/json
IN - Delete
Delete operation of resource: in
ID of process-name
ID of address
Successful operation
Internal Error
Response Content-Types: application/json
IN - Retrieve
Retrieve operation of resource: in
ID of process-name
ID of address
INTERFACES - Update
Update operation of resource: interfaces
interfacesbody object
ID of process-name
ID of address
Request Content-Types: application/json
Request Example
{ { {
"priority": "integer", Specify router priority
range: "0..255"
"neighbor-address": "string", IPV6 address
"cost": "integer", Interface cost
range: "1..65535"
"zone": "string", Zone
"database-filter": "boolean", Filter OSPFv3 LSA during synchronization\nand flooding for point-to-multipoint\nneighbor
"poll-interval": "integer" OSPFv3 dead-router polling interval (in\nseconds)
range: "0..65535"
units: "second"
}
]
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
},
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface
"cost": "integer", Interface cost
range: "1..65535" "prefix-list": "string" Filter prefixes based on an IPv6\nprefix-list
}
},
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD\npackets
"interface-name": "string", Interface
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "out": "boolean" Enable or disable database-filter
}
},
"demand-circuit": "boolean", Enable/disable demand circuit operation
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"passive": "boolean", Enable/disable routing updates on an\ninterface
"instance": "integer", Instance ID
range: "0..255" "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
},
"flood-reduction": "boolean", Enable/disable flood reduction "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
}
}
Successful operation
Internal Error
Response Content-Types: application/json
INTERFACES - Create
Create operation of resource: interfaces
interfacesbody object
ID of process-name
ID of address
Request Content-Types: application/json
Request Example
{ { {
"priority": "integer", Specify router priority
range: "0..255"
"neighbor-address": "string", IPV6 address
"cost": "integer", Interface cost
range: "1..65535"
"zone": "string", Zone
"database-filter": "boolean", Filter OSPFv3 LSA during synchronization\nand flooding for point-to-multipoint\nneighbor
"poll-interval": "integer" OSPFv3 dead-router polling interval (in\nseconds)
range: "0..65535"
units: "second"
}
]
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
},
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface
"cost": "integer", Interface cost
range: "1..65535" "prefix-list": "string" Filter prefixes based on an IPv6\nprefix-list
}
},
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD\npackets
"interface-name": "string", Interface
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "out": "boolean" Enable or disable database-filter
}
},
"demand-circuit": "boolean", Enable/disable demand circuit operation
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"passive": "boolean", Enable/disable routing updates on an\ninterface
"instance": "integer", Instance ID
range: "0..255" "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
},
"flood-reduction": "boolean", Enable/disable flood reduction "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
}
}
Successful operation
Internal Error
Response Content-Types: application/json
INTERFACES - Delete
Delete operation of resource: interfaces
ID of process-name
ID of address
Successful operation
Internal Error
Response Content-Types: application/json
INTERFACES - Retrieve
Retrieve operation of resource: interfaces
ID of process-name
ID of address
Successful operation
Internal Error
Response Content-Types: application/json
Response Example (200 OK)
{ { {
"priority": "integer", Specify router priority
range: "0..255"
"neighbor-address": "string", IPV6 address
"cost": "integer", Interface cost
range: "1..65535"
"zone": "string", Zone
"database-filter": "boolean", Filter OSPFv3 LSA during synchronization\nand flooding for point-to-multipoint\nneighbor
"poll-interval": "integer" OSPFv3 dead-router polling interval (in\nseconds)
range: "0..65535"
units: "second"
}
]
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
},
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface
"cost": "integer", Interface cost
range: "1..65535" "prefix-list": "string" Filter prefixes based on an IPv6\nprefix-list
}
},
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD\npackets
"interface-name": "string", Interface
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "out": "boolean" Enable or disable database-filter
}
},
"demand-circuit": "boolean", Enable/disable demand circuit operation
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"passive": "boolean", Enable/disable routing updates on an\ninterface
"instance": "integer", Instance ID
range: "0..255" "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
},
"flood-reduction": "boolean", Enable/disable flood reduction "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
}
}
INTERFACE - Update
Update operation of resource: interface
interfacebody object
ID of process-name
ID of address
ID of interface-name
Request Content-Types: application/json
Request Example
{ { {
"priority": "integer", Specify router priority
range: "0..255"
"neighbor-address": "string", IPV6 address
"cost": "integer", Interface cost
range: "1..65535"
"zone": "string", Zone
"database-filter": "boolean", Filter OSPFv3 LSA during synchronization\nand flooding for point-to-multipoint\nneighbor
"poll-interval": "integer" OSPFv3 dead-router polling interval (in\nseconds)
range: "0..65535"
units: "second"
}
]
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
},
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface
"cost": "integer", Interface cost
range: "1..65535" "prefix-list": "string" Filter prefixes based on an IPv6\nprefix-list
}
},
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD\npackets
"interface-name": "string", Interface
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "out": "boolean" Enable or disable database-filter
}
},
"demand-circuit": "boolean", Enable/disable demand circuit operation
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"passive": "boolean", Enable/disable routing updates on an\ninterface
"instance": "integer", Instance ID
range: "0..255" "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
},
"flood-reduction": "boolean", Enable/disable flood reduction "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
}
Successful operation
Internal Error
Response Content-Types: application/json
INTERFACE - Create
Create operation of resource: interface
interfacebody object
ID of process-name
ID of address
ID of interface-name
Request Content-Types: application/json
Request Example
{ { {
"priority": "integer", Specify router priority
range: "0..255"
"neighbor-address": "string", IPV6 address
"cost": "integer", Interface cost
range: "1..65535"
"zone": "string", Zone
"database-filter": "boolean", Filter OSPFv3 LSA during synchronization\nand flooding for point-to-multipoint\nneighbor
"poll-interval": "integer" OSPFv3 dead-router polling interval (in\nseconds)
range: "0..65535"
units: "second"
}
]
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
},
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface
"cost": "integer", Interface cost
range: "1..65535" "prefix-list": "string" Filter prefixes based on an IPv6\nprefix-list
}
},
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD\npackets
"interface-name": "string", Interface
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "out": "boolean" Enable or disable database-filter
}
},
"demand-circuit": "boolean", Enable/disable demand circuit operation
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"passive": "boolean", Enable/disable routing updates on an\ninterface
"instance": "integer", Instance ID
range: "0..255" "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
},
"flood-reduction": "boolean", Enable/disable flood reduction "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
}
Successful operation
Internal Error
Response Content-Types: application/json
INTERFACE - Delete
Delete operation of resource: interface
ID of process-name
ID of address
ID of interface-name
Successful operation
Internal Error
Response Content-Types: application/json
INTERFACE - Retrieve
Retrieve operation of resource: interface
ID of process-name
ID of address
ID of interface-name
Successful operation
Internal Error
Response Content-Types: application/json
Response Example (200 OK)
{ { {
"priority": "integer", Specify router priority
range: "0..255"
"neighbor-address": "string", IPV6 address
"cost": "integer", Interface cost
range: "1..65535"
"zone": "string", Zone
"database-filter": "boolean", Filter OSPFv3 LSA during synchronization\nand flooding for point-to-multipoint\nneighbor
"poll-interval": "integer" OSPFv3 dead-router polling interval (in\nseconds)
range: "0..65535"
units: "second"
}
]
}, "fast-detect-mode": "enumeration", Enable or disable BFD fast detection
Options:
disable
default
strict
"interval": "integer", Hello interval in milli-seconds
range: "3..30000"
units: "millisecond"
"detection-multiplier": "integer" Detect multiplier
range: "2..50"
},
"enable": [ null ], Authenticate packets
"hello-interval": "integer", Time between HELLO packets
range: "1..65535"
units: "second"
"dead-interval": "integer", Interval after which a neighbor is declared\ndead (in seconds)
range: "1..65535"
units: "second"
"prefix-suppression": "boolean", Enable/disable prefix suppression on an\ninterface
"cost": "integer", Interface cost
range: "1..65535" "prefix-list": "string" Filter prefixes based on an IPv6\nprefix-list
}
},
"ldp-sync": "boolean", Enable/Disable MPLS LDP sync
"packet-size": "integer", Limit size of OSPFv3 packets
range: "256..10000"
"mtu-ignore": "boolean", Enable/disable ignoring of MTU in DBD\npackets
"interface-name": "string", Interface
"retransmit-interval": "integer", Specify the transmit interval in seconds
range: "1..65535"
units: "second"
"network": "enumeration", Specify network type
Options:
broadcast
non-broadcast
point-to-point
point-to-multipoint
non-broadcast-point-to-multipoint "out": "boolean" Enable or disable database-filter
}
},
"demand-circuit": "boolean", Enable/disable demand circuit operation
"transmit-delay": "integer", Specify the transmit delay in seconds
range: "1..65535"
units: "second" "authentication-algorithm": "enumeration", Use the NULL, MD5 or SHA1 algorithm
Options:
null
md5
sha1
"enable": "boolean", Authenticate packets
"authentication-password": "string", Specify MD5 or SHA1 password
"spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"encryption-algorithm": "enumeration", Specify the encryption algorithm
Options:
null
des
3des
aes
aes192
aes256
"encryption-password": "string" Encryption password
},
"passive": "boolean", Enable/disable routing updates on an\ninterface
"instance": "integer", Instance ID
range: "0..255" "fast-reroute-enable": "enumeration", Enable/Disable Fast-reroute per-link or\nper-prefix
Options:
none
per-link
per-prefix {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}, {
"interface-name": "string" Interface
}
]
}, {
"interface-name": "string" Interface
}
]
},
"fast-reroute-use-candidate-only": "boolean" Use only interfaces on the candidate list as a\nbackup path
}
},
"flood-reduction": "boolean", Enable/disable flood reduction "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
},
"priority": "integer" Specify router priority
range: "0..255"
}
]
}
AUTHENTICATION - Update
Update operation of resource: authentication
authenticationbody object
ID of process-name
ID of address
ID of interface-name
Request Content-Types: application/json
Request Example
{ "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
}
}
Successful operation
Internal Error
Response Content-Types: application/json
AUTHENTICATION - Create
Create operation of resource: authentication
authenticationbody object
ID of process-name
ID of address
ID of interface-name
Request Content-Types: application/json
Request Example
{ "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
}
}
Successful operation
Internal Error
Response Content-Types: application/json
AUTHENTICATION - Delete
Delete operation of resource: authentication
ID of process-name
ID of address
ID of interface-name
Successful operation
Internal Error
Response Content-Types: application/json
AUTHENTICATION - Retrieve
Retrieve operation of resource: authentication
ID of process-name
ID of address
ID of interface-name
Successful operation
Internal Error
Response Content-Types: application/json
Response Example (200 OK)
{ "spi": "integer", Use IPSec AH authentication. Specify the\nSecurity Parameter Index (SPI) value
range: "256..4294967295"
"password": "string", Specify MD5 or SHA1 password
"enable": "boolean", Authenticate packets
"algorithm": "enumeration" Use the MD5 or SHA1 algorithm
Options:
md5
sha1
}
}
NEIGHBORS - Update
Update operation of resource: neighbors
neighborsbody object
ID of process-name
ID of address
ID of interface-name
Request Content-Types: application/json
Request Example
{ {
"priority": "integer", OSPFv3 priority of non-broadcast neighbor
range: "0..255"
"neighbor-address": "string", IPV6 address
"cost": "integer", OSPFv3 cost for point-to-multipoint\nneighbor
range: "1..65535"
"zone": "string", Zone
"database-filter": "boolean", Filter OSPFv3 LSA during synchronization\nand flooding for point-to-multipoint\nneighbor
"poll-interval": "integer" OSPFv3 dead-router polling interval (in\nseconds)
range: "0..65535"
units: "second"
}
]
}
}
Successful operation
Internal Error
Response Content-Types: application/json
NEIGHBORS - Create
Create operation of resource: neighbors
neighborsbody object
ID of process-name
ID of address
ID of interface-name
Request Content-Types: application/json
Request Example
{ {
"priority": "integer", OSPFv3 priority of non-broadcast neighbor
range: "0..255"
"neighbor-address": "string", IPV6 address
"cost": "integer", OSPFv3 cost for point-to-multipoint\nneighbor
range: "1..65535"
"zone": "string", Zone
"database-filter": "boolean", Filter OSPFv3 LSA during synchronization\nand flooding for point-to-multipoint\nneighbor
"poll-interval": "integer" OSPFv3 dead-router polling interval (in\nseconds)
range: "0..65535"
units: "second"
}
]
}
}
Successful operation
Internal Error
Response Content-Types: application/json
NEIGHBORS - Delete
Delete operation of resource: neighbors
ID of process-name
ID of address
ID of interface-name
Successful operation
Internal Error
Response Content-Types: application/json
NEIGHBORS - Retrieve
Retrieve operation of resource: neighbors
ID of process-name
ID of address
ID of interface-name
Successful operation
Internal Error
Response Content-Types: application/json
Response Example (200 OK)
{ {
"priority": "integer", OSPFv3 priority of non-broadcast neighbor
range: "0..255"
"neighbor-address": "string", IPV6 address
"cost": "integer", OSPFv3 cost for point-to-multipoint\nneighbor
range: "1..65535"
"zone": "string", Zone
"database-filter": "boolean", Filter OSPFv3 LSA during synchronization\nand flooding for point-to-multipoint\nneighbor
"poll-interval": "integer" OSPFv3 dead-router polling interval (in\nseconds)
range: "0..65535"
units: "second"
}
]
}
}
NEIGHBOR - Update
Update operation of resource: neighbor
neighborbody object
ID of process-name
ID of address
ID of interface-name
ID of neighbor-address
Request Content-Types: application/json
Request Example
{ {
"priority": "integer", OSPFv3 priority of non-broadcast neighbor
range: "0..255"
"neighbor-address": "string", IPV6 address
"cost": "integer", OSPFv3 cost for point-to-multipoint\nneighbor
range: "1..65535"
"zone": "string", Zone
"database-filter": "boolean", Filter OSPFv3 LSA during synchronization\nand flooding for point-to-multipoint\nneighbor
"poll-interval": "integer" OSPFv3 dead-router polling interval (in\nseconds)
range: "0..65535"
units: "second"
}
]
}
Successful operation
Internal Error
Response Content-Types: application/json
NEIGHBOR - Create
Create operation of resource: neighbor
neighborbody object
ID of process-name
ID of address
ID of interface-name
ID of neighbor-address
Request Content-Types: application/json
Request Example
{ {
"priority": "integer", OSPFv3 priority of non-broadcast neighbor
range: "0..255"
"neighbor-address": "string", IPV6 address
"cost": "integer", OSPFv3 cost for point-to-multipoint\nneighbor
range: "1..65535"
"zone": "string", Zone
"database-filter": "boolean", Filter OSPFv3 LSA during synchronization\nand flooding for point-to-multipoint\nneighbor
"poll-interval": "integer" OSPFv3 dead-router polling interval (in\nseconds)
range: "0..65535"
units: "second"
}
]
}
Successful operation
Internal Error
Response Content-Types: application/json
NEIGHBOR - Delete
Delete operation of resource: neighbor
ID of process-name
ID of address
ID of interface-name
ID of neighbor-address
Successful operation
Internal Error
Response Content-Types: application/json
NEIGHBOR - Retrieve
Retrieve operation of resource: neighbor
ID of process-name
ID of address
ID of interface-name
ID of neighbor-address
Successful operation
Internal Error
Response Content-Types: application/json
Response Example (200 OK)
{ {
"priority": "integer", OSPFv3 priority of non-broadcast neighbor
range: "0..255"
"neighbor-address": "string", IPV6 address
"cost": "integer", OSPFv3 cost for point-to-multipoint\nneighbor
range: "1..65535"
"zone": "string", Zone
"database-filter": "boolean", Filter OSPFv3 LSA during synchronization\nand flooding for point-to-multipoint\nneighbor
"poll-interval": "integer" OSPFv3 dead-router polling interval (in\nseconds)
range: "0..65535"
units: "second"
}
]
}